583594
12
Zoom out
Zoom in
Previous page
1/15
Next page
File Protection (write protect) while recording
The current clip can be Write Protected by briefly pressing (max. 1 second) the Mode
button while the camera is recording. This will set the file's read-only attribute which will
prevent the current recording from being deleted.
Note that formatting the card will delete all the files, including the protected files with the
read-attribute set.
Depending on the length of the current recording, the previous or the following clip may
also be automatically locked.
If the current recording file is less than 1 minute, both the previous file and the
current file will be locked.
If the current recording file will be closed in less than 1 minute, both the current file
and the following file will be locked.
If the current file has been recording for over 1 minute but will only be closed after at
least another 1 minute of recording, only the current file will be locked.
AE Lock (Auto Exposure Lock) / AWB Lock (Auto White Balance Lock)
AE Lock (AEL) and AWB Lock (AWBL) are advanced functions first implemented in
firmware version v2.27. Their functionality is disabled by default.
AEL and/or AWBL functionality must be explicitly enabled in the settings parameters.
AWBL functionality requires the White Balance parameter to be set to 'Auto'.
AE/AWB can be locked while the camera is either in standby mode or recording mode.
To enable AEL/AWBL point the camera at the object you want to correctly exposure and
then set the lock as follows:
If the camera is in Standby mode, press the Mode button for about 3 seconds until
the LED (yellow, blue or red) turns off. When the LED turns off, release the Mode
button. AEL/AWBL has been set.
If the camera is recording and the Recording Indicator parameter is set to On: Press
the Mode button for 3 seconds or longer until the blinking recording indicator remains
off. Now release the button. AEL/AWBL has been set.
If the camera is recording and the Recording Indicator parameter is set to Off: Press
the Mode button for 3 seconds or longer until the Mode LED turns on. Now release
the button and the LED will turn off. AEL/AWBL has been set.
AEL/AWBL can be disabled as follows:
Stop the recording and press the Mode button to switch to a different recording
Mode. Slowly pressing the Mode button 3 times will cycle back to the original Mode.
AEL/AWBL will be automatically reset when the camera is turned off.
FOV (Field Of View)
The field of view setting allows you to either capture the complete area of the image sensor
or a smaller area without noticeable loss in quality. The following table shows which area of
the image sensor is captured and how it is converted using the Wide and Narrow FOV
settings:
Resolution and
Frames per Sec.
FOV CMOS Area Explanation
1080p @ 5-30fps Wide 2304 x 1296 Reduced to 1920 x 1080 using pixel binning. Widest possible setting
1080p @ 5-30fps Narrow 1920 x 1080 Captured directly from center most portion of CMOS array. No scaling
720p @ 5-30fps Wide 2304 x 1296 Reduced to 1280 x 720 using pixel binning. Widest possible setting
720p @ 5-60fps Narrow 1280 x 720 Captured directly from center most portion of CMOS array. No scaling.
WVGA @ 5-60fps Wide 2304 x 1296 Reduced to 848 x 480 using pixel binning. Widest possible setting
WVGA @ 5-60fps Narrow 848 x 480 Captured directly from center most portion of CMOS array. No scaling. Narrowest possible setting
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mobius ActionCam at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mobius ActionCam in the language / languages: English as an attachment in your email.

The manual is 0,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info