549867

Mitsubishi XD8500U Manual

49
Zoom out
Zoom in
Previous page
1/79
Next page
EN-49
11. Press the ENTER button.
SETTING - BLACK LEVEL
INTERLOCKED
RED
GREEN
ON
0
0
BLUE
0
12. Select an item you want to set by pressing the or
button.
• Adjusttheblacklevelinareasotherthanthe
overlapped areas.
• WhenyousetINTERLOCKEDtoON,youcan
adjust RED, GREEN, and BLUE simultaneously.
When you set it to OFF, you can adjust RED,
GREEN, and BLUE separately.
13.
Select a setting value by pressing the or button.
Repeat steps 12 to 13, if necessary.
14. Press the MENU button once.
15. Select BRIGHT UNIFORMITY CORRECTION by
pressing the or button.
• WhenEDGEBLENDINGisON,thebrightnessof
the projected images is made even.
SETTING
BRIGHT UNIFORMITY
CORRECTION
16. Press the ENTER button.
• TheBRIGHTUNIFORMITYCORRECTION
dialog box and the correction position marker
are displayed.
POSITION :
SELECT : ENTER
Correction position marker
BRIGHT UNIFORMITY CORRECTION dialog box
•
Every time you press the ENTER button, the
BRIGHT UNIFORMITY CORRECTION dialog box
shows POSITION and LEVEL alternately.
POSITION
POSITION :
SELECT : ENTER
Press the , , , or
button to move the correction
position marker.
LEVEL
LEVEL : 100
SELECT : ENTER
Press the , or button to
adjust the correction amount.
17. Cancel the BRIGHT UNIFORMITY CORRECTION
dialog box.
Press any button other than the , , , or ,
and ENTER buttons to clear the dialog box.
Or, the dialog box disappears in 10 seconds after
the last use.
To cancel the menu:
18. Press the MENU button.
Adjusting projected images (continued)
Adjusting the image displayed on
the multi-screen
You can configure a multi-screen display using
multiple projectors.
You can make the joints of the images displayed on
the projectors unnoticeable and adjust the differences
in the brightness and the color tint of them.
Important:
• Dependingontheinstallationcondition,theprojected
image may fluctuate due to the effect of the exhausted
wind. In such a case, open up the space between
the projectors so that the image doesn’t fluctuate
(approximately 70 cm or more).
Making the joints unnoticeable
You can make the joints of the images projected on
the projectors unnoticeable using the menu settings.
(See page 31 for menu setting.)
1. Display the MULTI-SCREEN menu.
2.
Select EDGE BLENDING by pressing the or button.
EDGE BLENDING
OFF
3. Select ON by pressing the or button.
4. Select SETTING by pressing the or button.
SETTING
EDGE ADJUST
5. Select EDGE ADJUST by pressing the or
button.
6. Press the ENTER button.
SETTING - EDGE ADJUST
EDGE SELECT
BLENDING
WIDTH
MARKER
UP
OFF
START POSITION
0
128
OFF
7. Select an item you want to set by pressing the or
button.
EDGE SELECT
Select the joint you want to adjust from UP, LOW,
LEFT, and RIGHT.
BLENDING
When you select ON, the joint selected by EDGE
SELECT becomes unnoticeable.
START POSITION
Set the position to start the edge adjustment.
When UP or LOW is selected: 0 to 192
When LEFT or RIGHT is selected: 0 to 256
WIDTH
Set the width of the overlap of the joint selected by
EDGE SELECT.
When UP or LOW is selected: 4 to 368
When LEFT or RIGHT is selected: 4 to 496
• ThesettingrangeofSTARTPOSITIONand
WIDTH vary depending on their setting values.
MARKER
When you select ON, a marker for easily locating
the overlap of the joint is displayed.
8.
Select a setting value by pressing the or button.
Repeat steps 7 to 8, if necessary.
9. Press the MENU button once.
10.
Select BLACK LEVEL by pressing the or
button.
SETTING
BLACK LEVEL
… 49 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi XD8500U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi XD8500U in the language / languages: English as an attachment in your email.

The manual is 10,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Mitsubishi XD8500U

Mitsubishi XD8500U Additional guide - English - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info