549869

Mitsubishi WD390U-EST Manual

18
Zoom out
Zoom in
Previous page
1/69
Next page
EN-18
Basic operation (continued)
Setting the aspect ratio
You can change the aspect ratio of the input video
signal (or the ratio of width to height of the image).
Change the setting according to the type of the input
video signal.
With the remote control:
1. Press the ASPECT button.
• EverytimetheASPECTbuttonispressed,the
aspect mode changes from Normal to 16:9, to
Full, and back to Normal.
With the Picture menu:
(See page 21 for menu setting.)
1. Display the Picture menu.
2. Select Aspect Ratio by pressing the or button.
Aspect Ratio
Normal
3. Select your desired aspect ratio by pressing the
or button.
To cancel the menu:
4. Press the MENU button.
Important:
• Whena16:9imageiskeptdisplayedforalong
time before displaying 4:3 image, the afterimages
of the black bars may appear on the 4:3 image
screen. Consult your dealer in this case.
Caution:
• Thelampcan’tbelitagainforoneminuteafter
turned off for safety purpose. It will take another
one minute for the STATUS indicator to go out. If
you want to turn on the projector again, wait until
the indicator goes out, and then press the POWER
button.
• Theexhaustfansrotatefasterasthetemperature
around the projector rises.
• Whenthetemperaturearoundtheprojectorrises
high, the sign “Temperature!!” blinks red on the
screen. If the temperature stays high, the lamp will
go out automatically.
Important:
• Donotdisplayastillpictureforalongtime
because the afterimages may persist on the screen.
When connecting to a laptop computer:
When this projector is connected to a laptop
computer, there may be times when images may not
be projected. When it occurs, set the computer so that
it can output signals externally. The procedure varies
across computers in use. See the instruction manual
of your computer.
Watching 3D content
You can enjoy 3D content with this projector.
In order to watch 3D content, you need to have the
following items:
• Field-sequential3Dvideocontents
• DLP™Link™active3Dglasses
(Field-sequential: The system which displays
alternately the image for the left eye and the right eye.)
RLRRLRLL
RLRLRLRL
RLRRLRLL
RLRLRLRL
RLRRLRLL
RLRLRLRL
RL
R
L
L
L
R
R
R
L
RL
3D image Format
Page flipping
(Field sequential)
Top & bottom CheckerboardSide by side
Not supported Not supportedNot supportedSupported
DLP™ Projector
The shutter timing of the 3D
glasses is controlled by
being synchronized with
switching of right and left
3D image which is detected
by the sensor of glasses.
DLP™ Link™ active
3D glasses
LR
Sensor
Play the field-sequential 3D video contents on a
computer or DVD player, and then, connect the cable
with the projector.
Go to the Picture menu (or press the 3D button on
the remote control) and set the 3D option to On.
(See page 22.)
Put on the 3D glasses to watch the contents.
If the contents are not projected correctly, go to the
Picture menu, and switch the 3D Sync Invert option to
On.
Important:
• Youcannotprojectthe3Dcontentfromtheinput
source LAN Display, USB Display, and PC Less
Presentation.
• Iftheviewingdistanceisnearerthanthe
recommended distance, it will cause physical
discomfort and eye fatigue.
• Watchthecontentsinfrontofthescreen,notatbig
angle. If you are viewing the screen at big angle,
you may not be able to view 3D contents correctly.
• Ifyouarenotviewing3Dcontentscorrectly,
check to see if the 3D glasses are powered on or
adequately charged. See the instruction manual of
the 3D glasses for more information.
• Therearepersonaldifferencesinviewingthe3D
images. For persons with myopia, hypermetropia,
astigmatism or left and right sights, please wear
glasses to correct them then wear the 3D glasses.
• Thepictureseemsmisplacedatthestartof
projecting the 3D images, however, this is not a
malfunction.
• Withthe3DoptionsettoOn,contentsdisplayed
on the projector appear darker. It is normal and
does not mean the projector is malfunctioning.
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi WD390U-EST at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi WD390U-EST in the language / languages: English as an attachment in your email.

The manual is 10,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Mitsubishi WD390U-EST

Mitsubishi WD390U-EST Additional guide - English - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info