549869
15
Zoom out
Zoom in
Previous page
1/69
Next page
EN-15
Important:
• Theautomatickeystoneadjustmentmaynot
be carried out correctly because of the ambient
temperature and the installation conditions of the
projector and the screen. In such cases, correct the
keystone manually.
• Whentheprojectorisprojectingimageswhere
acceleration is present, such as in a vehicle and
aircraft, the automatic keystone adjustment may
not function correctly. In such a case, set Auto
Keystone in the Installation menu to Off and correct
the keystone manually.
• Youcancorrecttheverticalkeystones.However,
their adjustment ranges are limited in such
correction.
• Whenthekeystoneadjustmentiscarriedout,the
adjustment value is indicated. Note that this value
doesn’t mean a projection angle.
• Theallowablerangeoftheadjustmentvaluein
the keystone adjustment varies depending on
the installation condition, input signal and aspect
settings in MENU.
• Whenthekeystoneadjustmenttakeseffect,the
MAGNIFY mode and the Overscan function cannot
be used.
• Whenthekeystoneadjustmenttakeseffect,the
resolution decreases. In addition, stripes may
appear or straight lines may bend in images with
complicated patterns. They are not due to product
malfunctions.
• Noisemayappearonthescreenduringthe
keystone adjustment because of the type of the
video signal being projected and the setting values
of the keystone adjustment. In such cases, set the
keystone adjustment values in the range where the
image is displayed without noise.
• Whenthekeystoneadjustmentiscarriedout,the
image may not be displayed correctly because of
the type of input signal.
When entire projected image
isn’t displayed within the screen
(E-Zoom/Shift)
To adjust the projected image size and position, use
E-Zoom/Shift in the Installation menu.
(See page 21 for menu setting.)
1. Display the Installation menu.
2. Press the or button to select E-Zoom/Shift.
E-Zoom/Shift
OK
3. Press the ENTER button.
• TheE-ZOOM/SHIFTmenuappearsatthecenter
of the screen.
E-ZOOM
SHIFT
VOL
4. Press the VOLUME or button to adjust the
projected image size.
• EverytimetheVOLUME button is pressed,
the projected image becomes larger.
• EverytimetheVOLUME button is pressed,
the projected image becomes smaller.
• Projectedimageisamaximumasfactory
default.
E-ZOOM
SHIFT
VOL
Original image size
(= maximum image size)
Reduced image
5. Press the , , or button to move the
projected image position.
• Everytimethe button is pressed, the
projected image moves up.
• Everytimethe button is pressed, the
projected image moves down.
• Everytimethe button is pressed, the
projected image moves to the left.
• Everytimethe button is pressed, the
projected image moves to the right.
Adjustable in any of
four directions
E-ZOOM
SHIFT
VOL
Important:
• Whenyoureducetheprojectedimageusingthe
E-Zoom/Shift function, the resolution decreases. In
addition, stripes may appear or straight lines may
bend in images with complicated patterns.
Preparation (continued)
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi WD390U-EST at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi WD390U-EST in the language / languages: English as an attachment in your email.

The manual is 10,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Mitsubishi WD390U-EST

Mitsubishi WD390U-EST Additional guide - English - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info