475307

Mitsubishi WD-Y57aa Manual

46
Zoom out
Zoom in
Previous page
1/124
Next page
46 Chapter 3. TV Setup
Additional Setup Using the
NetCommand Menu, continued
Part 2: Learn A/V Receiver Power and Volume Keys
1. Press tohighlightthecheckboxforPower On.
2. Press
ENTER
ontheTV’sremotecontrolandwhilethe
textPower Onisflashing,pressandholdthe
POWER
or
POWER ON
keyontheA/Vreceiver’sremotecontrol.
3. IfyourA/Vreceiverhasaseparate
POWER OFF
key,press
tohighlightthecheckboxforPower Off.Repeat
theprecedingstepto“learn”the
POWER OFF
key.
If your A/V receiver has no POWER OFF key, skip this step.
4. Press tohighlightadditionalcheckboxesand
repeatstep2fortheotherA/Vreceiverkeys.
5. Whenallkeyshavebeenlearned,press
EXIT
.
Figure 15. Perform NetCommand
“learning” for these A/V receiver
functions.
Part 3: Tell the TV Where Connected Devices
Send Audio
Digital Surround Sound
1. Press
INPUT
todisplaytheInputSelectionmenu.
2. HighlighttheiconfortheDVDplayerandpress
ENTER
to
switchtotheDVDinput.
3. Press
MENU
andopentheNetCommandmenu.
4. HighlightthetextboxunderAV RECEIVER SETUP.
5. Press tomovethroughthelisttoDVD.
ThissettingtellstheTVthatdigitalsurroundsound
fromtheDVDplayerisconnecteddirectlytotheA/V
receiver’s
DVD AUDIO
input.
Figure 16. A/V receiver setup
indicating the DVD player’s audio
output is connected directly to
the A/V receiver’s DVD Audio
input.
6. Press
EXIT
toclosethescreen.
Audio Directly from TV
1. Press
INPUT
todisplaytheInputSelectionmenu.
2. Highlighttheiconforanantennainput(
ANT 1
or
ANT 2
)andpress
ENTER
toswitchtotheinput.
3. Press
MENU
andopentheNetCommandmenu.
4. HighlightthetextboxunderAV RECEIVER SETUP.
5. Press
tomovethroughthelisttoTV.Thisisthelist
ofA/VreceiverinputsyounamedintheAVReceiver
(AVR)Learnscreen(seefigure13).
TheTVsettinghereindicatesthataudiooutfrom
theTV(
DIGITAL AUDIO OUT
or
AUDIO OUT
LEFT/RIGHT
)issenttotheA/Vreceiver’s
TV
AUDIO
input.Audiofrom
ANT 1
and
ANT 2
,
memorycards,andIEEE1394devicesmustgotothe
A/VreceiverfromtheTV’saudiooutputsasthereis
nowaytosendtheaudiodirectlytotheA/Vreceiver.
Figure 17. A/V receiver setup
indicating that the TV’s audio
output (
DIGITAL AUDIO
OUT
or
AUDIO OUT LEFT/
RIGHT
) is connected to the
A/V receiver input named
TV
AUDIO
.
6. Press
EXIT
toclosethescreen.
Analog Audio (e.g., analog VCR)
1. Press
INPUT
todisplaytheInputSelectionmenu.
2. HighlighttheiconfortheVCRandpress
ENTER
to
switchtotheVCRinput.
3. Press
MENU
andopentheNetCommandmenu.
4. HighlightthetextboxunderAV RECEIVER SETUP.
5. ConfirmthatthesettingisatNone,thedefault.
ThissettingtellstheTVtoautomaticallytransferVCR
audiototheA/Vreceiver.TheTVconvertsanalog
audiotodigitalforouputtoadigitalA/Vreceiver.
Figure 18. A/V receiver setup
indicating the analog VCR’s
audio output is automatically
sent to the A/V receiver via the
TV’s audio output.
6. Press
EXIT
toclosethescreen.
IMPORTANT
To hear audio that is sent from the TV to the A/V
receiver, you must have:
•
physically connected the TV to the A/V receiver
•
learned the IR codes for the A/V receiver inputs
• chosenthecorrectinputunderNetCommand
AV RECEIVER SETUP
•
selected the A/V receiver in the Input Selection
menu
If you hear no audio from the A/V receiver, open
the NetCommand menu and perform the proce-
dure in Part 3, “Audio Directly from TV” or “Analog
Audio (e.g. analog VCR.”
Note that all audio should be sent through the TV’s
audio outputs unless you have surround sound
audio going from the device directly to the A/V
receiver.
… 46 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi WD-Y57aa at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi WD-Y57aa in the language / languages: English as an attachment in your email.

The manual is 8,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info