Manual Mitsubishi WD-Y57aa (page 45 of 124) (English)

475307

Zoom out

Zoom in

1/124

Chapter 3. TV Setup 45

soundsuchasDolbyDigitalorDTSdirectlytotheA/V

receiver,bypassingtheTVentirely.ADVDplayeris

usedinthisexample.

Itisalsopossibleforyoursetuptoincludetwo(or

more)deviceswithdigitalsurroundsoundconnected

directlytotheA/Vreceiver.Thesedevicescouldbe

yourDVDplayerplusacableboxorsatellitereceiver.

• AudioDirectlyfromTV.Audiofrom

ANT 1

and

ANT 2

,memorycards,andIEEE1394devicesis

senttotheA/VreceiverfromtheTV’sanalog

AUDIO

OUT LEFT/RIGHT

orDIGITAL AUDIO OUT.In

thissetup,youtellNetCommandtoswitchtotheA/V

receiver’sdesignatedTVaudioinput.

• AnalogStereoOutputOnly.Audiofromsources

withonlyanalogstereooutput(suchasaVCR)canbe

sentdirectlytotheA/VreceiverordirectlytotheTV

firstandthenontotheA/Vreceiver.

Mitsubishirecommendsyousendaudiodirectlytothe

TV,whichcanconvertthesignaltodigitalaudioand

sendittoadigitalA/Vreceiverasdigitalaudio.

Part 1: Learn IR Codes for A/V Receiver Inputs

1. ConnectyourA/VreceivertotheTVandDVDplayer.

Seechapter2,“TVConnections,”forsuggestions.

2. OpentheNetCommandmenu.

3. HighlighttheLearnbuttonunderAV RECEIVER

SETUPandpress

ENTER

todisplaytheAVReceiver

(AVR)Learnscreen.Seefigure13.

WhentheAVReceiverLearnscreenopens,the

highlightisonthecheckboxforInput 1.Theterms

Input 1–Input 4aregenericreferencestotheA/V

receiverinputsforwhichtheTVcanlearnIRcodes.

4. Inthisexample,theIRcodefortheA/Vreceiver’s

Audio

inputwillbe“learned”asInput 1.

Press

ENTER

ontheTV’sremotecontrolandwhilethe

textInput 1isflashing,pressandholdthe

TV INPUT

key

ontheA/Vreceiver’sremotecontrol.

5. Whenacheckappearsinthecheckbox,releasethe

TV INPUT

key.

Additional Setup Using the

NetCommand Menu, continued

A/V Receiver Audio Inputs

(numbers 1–4 refer to the IR learning sequence in this screen)

Text Boxes for You to Enter the

Name of the Destination A/V

Receiver Audio Input

A/V Receiver Key Commands

the TV Can Send to the A/V

Receiver When “Learned”

Figure 13. The AV Receiver (AVR) Learn screen lets you

set up NetCommand control of your A/V receiver.

6. Press tohighlightthetextboxforInput 1.Toenter

aname:

• Use ontheTV’sremotecontroltoselecta

character.

• Press

ENTER

tosettheletterandmovethehighlight

tothenextletter.

• Todeletealetter,highlightitandpressCANCEL

orpress toinsertablankspace(underscore

character).

• Toreturnthehighlighttothefirstcharacter,

repeatedlypress

CANCEL

• Toreturntothedefaultname,highlightthefirst

characterandpress

CANCEL

7. Press tohighlightthecheckboxforInput 2.In

thisexample,theIRcodefortheA/Vreceiver’s

DVD

Audio

inputwillbe“learned”asInput 2.

8. Press

ENTER

ontheTV’sremotecontrolandwhilethe

textInput 2isflashing,pressandholdthe

DVD INPUT

key

ontheA/Vreceiver’sremotecontrol.

9. Whenacheckappearsinthecheckbox,releasethe

DVD

key.

10. Press tohighlightthetextboxforInput 2.Enter

thenameDVD.Use toenterthenameTV.

Press

ENTER

toseteachletter.

11. Repeatsteps7through10foranyadditionalA/V

receiverinputsconnectedtootherdevices.

Figure 14. Assign names

to identify “learned” A/V

receiver audio inputs

IMPORTANT

All audio from what you are watching on

the TV is always available as an output on

both the TV’s AUDIO OUT LEFT/RIGHT and

DIGITAL AUDIO OUT jacks.

To use the surround sound capabilities of your

A/V receiver however, you must connect your

DVD player, satellite receiver, or cable box

directly to the A/V receiver, as surround sound

may not be available from the TV’s audio output.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi WD-Y57aa in the language / languages: English as an attachment in your email.

The manual is 8,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Mitsubishi WD-Y57aa Manual

Product: