475327
79
Zoom out
Zoom in
Previous page
1/94
Next page
Appendices 79
Resolving CEC Conflicts, Changing HDMI
Connections, Removing HDMI Devices
Because each manufacturer selects which CEC func-
tions to support, some devices can conflict with other
devices. If control conflicts arise, you can:
Turn off CEC in the other device’s setup menu.•
Turn off TV control of an individual CEC device (see •
fiugre 5 below).
Reset TV control of an individual CEC device (see •
figure 6 below).
Turning Off the TVs HDMI Control of an Individual
CEC Device (Figure 5)
Press
1.
MENU
on the TV remote control to enter the TV
Main menu.
Select the
2.
Inputs menu using the keys.
Select the
3.
Inputs > Name menu using the key.
Highlight the device to remove using the
4.
key and
then the key.
With the device highlighted, select
5.
Control Off to
turn off the TV’s ability to control the device.
Press
6.
EXIT
to clear the menus.
Figure 5. Inputs > Name menu with HDMI Control for
AVR Tuner turned off
Resetting HDMI Control or Removing an HDMI
Device (Figure 6)
Power off the device.
1.
If removing the device, disconnect the HDMI cable.
2.
Press
3.
MENU
on the TV remote control to enter the TV
Main menu.
Select the
4.
Inputs menu using the keys.
Select the
5.
Inputs > Name menu using the key.
Highlight the device to reset using the
6.
key and
then the key.
With the device highlighted, select
7.
Delete to reset
HDMI Control.
Press
8.
EXIT
to clear the menus.
If the device is still connected, the Auto Input
Sensing screen will display.
Figure 6. Inputs > Name menu with AVR DVD deleted.
Using NetCommand HDMI Control
As an example of using NetCommand for HDMI
devices, you would press
PL AY
on the device itself to:
Turn on the TV if not already on•
Switch to the device (no need to display the • Input
Selection menu)
Begin play of the device•
Test your equipment with the TV’s remote control to
find out which commands are supported. See the table
below for commands that may be available, depending
on the individual device.
CEC-enabled VCR, DVD, and DVR functions that
may be available:
Record/
Playback
Menu
Navigation
Channel Tuning Other
CH
/
GUIDE
ENTER
Digits
0–9
,
CANCEL
F1
(content)
*
CANCEL
(to cancel)
ENTER MENU
*
The
F1
key defaults to work like the device’s
LIST
key.
If you have a CEC-enabled A/V receiver, CEC-enabled
devices connected to the A/V receiver with an HDMI
cable may also be controllable. They can be selected
from the TVs Input Selection menu.
CEC-enabled A/V receiver functions that may be
available:
Try the •
VOL
,
MUTE
, and menu-navigation keys.
To open the A/V receiver menu, follow these steps:•
While watching TV, press 1.
AUDIO
.
Press 2. repeatedly until the Speakers option
displays.
While3. Speakers is still displayed, press
MENU
.
736 or 835 Series TV. You can use NetCommand IR
“learning” to add commands to those supported by
CEC. You must first connect and place IR emitters for
the devices.
79


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi WD-73C8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi WD-73C8 in the language / languages: English as an attachment in your email.

The manual is 4,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info