475327
78
Zoom out
Zoom in
Previous page
1/94
Next page
78 Appendices
Figure 4 (NetCommand HDMI Control is off).•
The TV’s NetCommand for HDMI Control is
turned off.
Action: Follow the instructions in “Enabling or
Disabling the TV’s NetCommand HDMI Control”
on the previous page.
Note: You may not see the screen in figure 2 if the
HDMI device has previously been detected by
the TV. To check if CEC is enabled for the de-
vice, open the Inputs > Name menu. If you are
unable to change the device name, it indicates
CEC is enabled.
Figure 4. NetCommand HDMI Control is off.
With the HDMI CEC device powered on, switch the
3.
TV to the device (press the
INPUT
key, highlight the
device icon, press
ENTER
). Within a few minutes CEC
will be established. You may see the screen shown
in figure 2. If the screen does not display, ensure
HDMI control is turned on in the device’s menus.
Once CEC has been established, CEC will auto-
4.
matically name the device. Any name you may
have previously selected in figure 3 or figure 4 will
be changed to the new name.
NetCommand HDMI Control for an HDMI
A/V Receiver and Connected Devices
Turn on the TV’s NetCommand for HDMI feature.
1.
See “Enabling or Disabling the TV’s NetCommand
HDMI Control” on the previous page.
Connect the A/V receiver to the TV before connect-
2.
ing any other device to the A/V receiver.
If you want to be able to switch between the A/V
3.
receiver speakers and the TV speakers, also
connect the TV’s
DIGITAL AUDIO OUTPUT
to an
input on the A/V receiver.
Power on the TV and A/V receiver and allow both to
4.
complete the power-on sequence (boot up).
Connect the HDMI output of the A/V receiver to the
5.
TV’s HDMI input. The TV will automatically switch
to the input.
If the A/V receiver is HDMI CEC compatible, turn
6.
on HDMI control in the A/V receiver (see the A/V
receiver menus). If the A/V receiver menu does not
show HDMI control, the A/V receiver may not be
compatible with CEC.
HDMI
3D
GLASSES
EMITTER
AVR
AUDIO
OUTPUT
DIGITAL
AUDIO
OUTPUT
L
R
L
R
(480i / 480p / 720p / 1080i)
L
R
DVI/PC INPUT
VIDEO
Y
Pb
Pr
AUDIO
Pb
Y/ VIDEO
Pr
VIDEO: 480i/480p/720p/1080i/1080p
AUDIO: PCM STEREO
PC: VGA, W-VGA, SVGA, W-SVGA,
XGA, W-XGA, SXGA, 720p/ 1080p
1
2
3
HDMI
IR-
NetCommand
Output / External
Controller Input
R
INPUT 3
INPUT 2
INPUT 1
S-VIDEO
INPUT 3
AUDIO
R
L
AUDIO
ANT 2 / AUX
ANT 1 / MAIN
HDMI
1
2
3
DIGITAL
AUDIO
OUTPUT
DIGITAL
AUDIO
OUTPUT
HDMI OUT
DIGITAL
AUDIO
OUTPUT
High-definition
DVD player
DVD player
Cable box
VCR
TV back panel
A/V receiver with
HDMI output
Optional
digital audio
connection
Connecting HDMI devices. The optional digital audio
connection allows you to hear audio through the A/V
receiver from devices connected to the TV only.
Plug in the AC power cord and power on the first
7.
HDMI device, such as a disc player, cable box or
satellite receiver, and allow the device to complete
the power-on sequence (boot up). Stop playback if
the device starts playing.
Connect the device to the A/V receiver with an
8.
HDMI cable.
Select the device’s HDMI input on the A/V receiv-
9.
er’s front panel controls or remote control.
If the new device has the HDMI CEC Control •
feature turned on, the TV will show a display
similar to Figure 2 and automatically name the
device.
If the new device has the HDMI CEC Control •
feature turned off or if it is not CEC compatible,
there will be no display.
Check the new device’s menu for the HDMI
Control feature and turn it on. If there is no
HDMI Control feature listed, this device may
not be compatible with HDMI CEC and you will
need to control the device manually.
After the present device has been connected and set
10.
up, repeat steps 7 through 9 for the next HDMI device.
736 or 835 Series TV.
11.
If desired, perform
NetCommand IR Learning to supplement CEC
functions.
78


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi WD-73C8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi WD-73C8 in the language / languages: English as an attachment in your email.

The manual is 4,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info