475327
26
Zoom out
Zoom in
Previous page
1/94
Next page
26
TV Operation and Features
4
Choosing a Viewing Source
Input Selection menu
Choose a viewing source from the Input Selection
menu. The current TV input appears as a full-color icon
in this menu.
Press
1.
INPUT
to display the Input Selection menu. If
there are only two inputs to the TV,
INPUT
switches
between them without displaying the menu.
Highlight an input icon using
2.
.
Press
3.
ENTER
to switch to the input and close the
menu.
More About the Input Selection Menu
• Toassignmeaningfulnamestotheicons,seethe
Inputs > Name menu, page 48.
• Torearrangetheicons,seetheInputs > Order
menu, page 48.
Sleep Timer
The Sleep Timer turns the TV off after the length of time
you set. To set the TV to turn on at a certain time, see
the Setup > Timer menu on page 46.
Setting the Sleep Timer
Press
1.
SLEEP
on the remote control.
Press
2.
SLEEP
additional times to increase the time in
30-minute increments up to the maximum of 120
minutes.
Press
3.
EXIT
or wait five seconds without pressing any
keys for the message to disappear.
Press
4.
SLEEP
to view the time remaining before the
sleep timer turns off the TV.
Cancelling the Sleep Timer
Press
1.
SLEEP
to display the on-screen message.
Press
2.
SLEEP
repeatedly until OFF is displayed.
Note: After five seconds of inactivity, the message box
will disappear.
TV Tips
Turning the TV On or Off
To turn the TV on or off, point the remote control at the
front of the TV and press the
POWER
button. Alterna-
tively, press the
POWER
button on the control panel of the
TV.
If You Turn Off the TV by Mistake
Press 1.
POWER
again within about 60 seconds (while
the lamp is still hot) to have the TV come back on
immediately.
If the 2.
LAMP
indicator starts blinking (about 60
seconds after you shut off power), wait a few
moments for the
LAMP
indicator to stop blinking
and press
POWER
to turn the TV on again.
Controlling Sound Volume
Press •
VOL
/ to adjust the sound level.
See also “Controlling A/V Receiver Sound Volume” on •
page 15.
Changing Channels (antenna sources)
To change channels:
Enter the channel number using the number keys •
on the remote control and press
ENTER
. For a two-
part digital channel, such as 3-1, press
3
CANCEL
1
to enter a dash (separator).
Press •
CH/PAGE
/ to change channels one
channel at a time.
Press and hold •
CH/PAGE
/ to move quickly
through channels.
Press •
QV
(QuickView) to switch back to the previ-
ously tuned channel.
Press •
GUIDE
to display ChannelView channel listings,
highlight a channel, and press
ENTER
to select.
Use the Fav (Favorites) feature to set up lists of •
favorite channels and tune to them with the
FAV
key.
See Setup > Edit > Fav 1–Fav 6 on page 44.
NOTE: Perform channel memorization to make finding
channels easier. See Setup > Scan, page 43.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi WD-73C8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi WD-73C8 in the language / languages: English as an attachment in your email.

The manual is 4,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info