475269
31
Zoom out
Zoom in
Previous page
1/40
Next page
Appendices 31
For assistance call 1(800) 332-2119
Reset Name When to Use How to Use Resulting Action
System Reset If the TV does not turn
on or off, does not
respond to the remote
control or control-
panel buttons, or has
audio but no video.
Press and hold the
POWER
button on
the control panel for ten seconds.
The TV will turn off and power
on. Any changes you made
most recently, before using
SYSTEM RESET
, may be lost.
Reset All To reset all consumer-
accessible settings
and all memories to
the original factory
defaults.
Press
MENU
and go to Setup >
Reset All.
CAUTION: All owner-performed
setups and adjustments will be
erased.
The TV will return to the default
condition and will start the
guided setup. All memory and
settings outlined in this Owner’s
Guide will need to be set again.
Appendix B: Troubleshooting, continued
General TV Operation
Symptom Remarks
1. A fan is running even while the TV is
powered off.
The room is too warm. When the TV is off, internal components con-
tinue to draw power and must be cooled by the fan.
2.
The TV remote control does not work. Check that the batteries are fresh and installed correctly.
Be no more than 20 feet from the TV when using the remote control.
Reset the remote control. See “Care of the Remote Control,” page 29 .
3.
When I try to use the remote control, the
POWER key blinks five times.
Replace the batteries.
4.
TV does not respond to the remote
control or to control-panel buttons and
TV will not power on or off.
Unplug the AC power cord for 10 seconds.
Press and hold the
POWER
button on the control panel to perform
system reset.
5.
When a device is selected from the
inputs menu, the screen is blue or black
or the screen saver appeared (no signal
source).
Make sure the selected device is turned on.
Begin play of the device.
6.
You cannot access a channel.
Use number keys instead of
CHANNEL
/ .
Be sure the channel you want to view is in memory.
Check that the TV is switched to the correct device or antenna for
that channel by pressing the
INPUT
key.
Make sure the channel is not locked in the Channel Locks menu.
If you cannot tune to a virtual digital channel even though the TV
has already memorized digital channels, tune to the physical (RF)
channel number used by the broadcaster. The virtual channel will
then be automatically added to memory. See Adding a Channel,
page 24 for more on RF channels.
You may be trying to tune to an analog channel that is no longer
broadcasting.
7.
Rating restrictions are not working.
Open the Locks menu and:
Verify that the ratings locks are active.
Rating restrictions apply only to content on the
antenna
input.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi WD-73638 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi WD-73638 in the language / languages: English as an attachment in your email.

The manual is 2,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info