475335

Mitsubishi WD-57831 Manual

30
Zoom out
Zoom in
Previous page
1/126
Next page
30 Chapter 2. TV Connections
IEEE 1394 Devices, continued
Tips for Connecting IEEE 1394 Devices
• Donotloopthelast
deviceinthechainback
totheTV.Whenthe
devicechainislooped,
theTVmaynotbeable
toworkwiththeother
devices.
• Placedevicesthathaveonlyamechanical(two-
position)powerswitchattheendofthechainorleave
thepowerswitchintheonposition.Whenturnedoff,
IEEE1394signalsmaynotbeabletopassthroughthe
devicetootherdevices.
• Placedeviceswiththeslowestcommunicationspeed
attheendofthechain.Sometimesthecommunica-
tionspeedismarkedneartheIEEE1394connector
withan“S”number.Thehigherthenumber,thefaster
thecommunicationspeed.ThisTVhasacommunica-
tionspeedofs400.Deviceswithslowcommunica-
tionspeedscaninterferewithIEEE1394signalsfrom
fasterdevices.Whensettingupadigitalrecording
betweenafasterdeviceandaslowerdevice,makethe
slowerdevicethesourceandmakethefasterdevice
therecorder.
• UseIEEE1394cables15feetorlessinlength
betweendevices.
• ThisTVisanIEEE1394adevice.Itcanbeusedwith
anIEEE1394bsystemwhenanIEEE-1394a-to-1394b
convertorisused.IEEE1394bsystemsarecapableof
greaterdistancesandmulti-roomapplications.
• TheTVcanrecognizeamaximumofsevenIEEE1394
devicesatanyonetime.
%JHJUBM
%7%
%JHJUBM
7$3
57
IEEE 1394 Camcorders
• Control Functions.Connectthecamcordertoan
IEEE1394jackonthefrontorrearoftheTVandtest
usingtheTV’sremotecontroltooperatethecam-
corder.Ifyourmodeldoesnotoperateproperly,use
thecamcorder’scontrolbuttonsinstead.
• MPEG and DV Camcorders.Ifyouareunableto
playbackovertheIEEE1394interface,usetheanalog
audio/videoconnectionsdescribedinchapter2,“TV
Connections.”
57*OQVU
You can connect an IEEE 1394 camcorder with an IEEE
1394 cable or with analog audio/video cables. In either
case, test using the TV’s remote control to operate the
camcorder via the IEEE 1394 cable.
1. ConnectyourIEEE1394camcordertooneoftheTV’s
IEEE1394jacks.
2. WhentheNew1394Devicescreendisplays(see
above),confirmthatthecorrectformat,eitherMPEG
orDV,ismarked.Inmostcases,theTVautomatically
detectsthecamcorderformatinuse.
3 IfyouhaveconnectedaDVcamcorderandtheMPEG
radiobuttonismarked,press
toselect
DV
.
4. Press
EXIT
.
DV Camcorder Notes
A. When viewing DV camcorders, it is normal for
temporary audio and video distortion to occur
under conditions such as:
• Playbackstartandstop
• Playbackpause
• Forwardorreversepicturesearch
B. Some older DV Camcorder models are not
compatible with this TV’s IEEE 1394 system
and the New 1394 Device screen will not
appear when the camcorder is connected. For
playback of incompatible DV camcorders, try
S-video and analog audio connections instead.
… 30 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi WD-57831 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi WD-57831 in the language / languages: English as an attachment in your email.

The manual is 8,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info