493637
24
Zoom out
Zoom in
Previous page
1/30
Next page
EN-24
Troubleshooting (continued)
Images aren’t projected correctly.
Problem Cause and solution
Projected images are shaking.
Projected images are displaced.
Check that the cable connected to the external device isn’t intermittent.
Connect the cable’s plug with the external device’s connector firmly.
Press the AUTO POSITION button.
Some computers output out-of-spec signals on rare occasion. Adjust the SIGNAL menu. (See page 19.)
Projected images are distorted. Adjust the projector and the screen so that they are perpendicular to each other. (See page 12.)
Projected images are dark.
Adjust BRIGHTNESS in the IMAGE menu. (See page 18.)
Replace the lamp. (See page 22.)
Remove the lens cap.
Check SET UP function in Signal menu.
Projected images are blurred.
Adjust the focus. (See page 13.)
Clean the lens.
Remove the lens cap.
Adjust BRIGHTNESS and CONTRAST in the IMAGE menu. (See page 18.)
Adjust the projector and the screen so that they are perpendicular to each other. (See page 12.)
White dots are seen on projected images.
Black dots are seen on projected images.
This symptom is normal for a DLP projector and is not a malfunction. (A very small number of pixels may stay
lit or out, but such symptom is not a malfunction. Pixels of 99.99% or more are effective.)
Rainbow blur appears in projected images. This is due to color breaking noise that occurs in a DLP system and is not a malfunction.
Fine streak pattern appears in projected images.
It occurs because of interference with the screen and isn’t a product malfunction. Change the screen or read-
just the focus of the projector.
Projected images (and/or audio) appear wavy and
distorted.
Connect the cable’s plug with the external device’s connector firmly.
Keep the projector away from equipment generating interfering radio waves.
When the keystone adjustment is carried out, the image may not be displayed correctly because of the type
of input signal. This isn’t a product malfunction. In this case, readjust the keystone so that the amount of key-
stone correction is as small as possible.
Tint in projected images is incorrect.
Check that COMPUTER INPUT in the SIGNAL menu is correctly set. (See page 17.)
Check that the cable connected to the external device isn’t broken.
Color shade looks different.
The color shade between several equipment may differ depending on the types of optical parts, however, it
does not indicate a malfunction.
Colors may look different from those on the TV or on a display of a personal computer, however, it is due to
differences in the range of color reproduction, and is not a malfunction.
Only the motion areas in the images supplied from
the computer aren’t displayed.
This is caused by the computer being used. Contact the manufacturer of your computer.
Projected images are obscured.
Match the output resolution of your computer with the resolution of the projector. For the method to change
the output resolution of the computer, contact the manufacturer of your computer. (See page 29.)
Some images and texts appear obscured during the keystone adjustment. In such cases, use the projector
without applying the keystone adjustment. (See page 12.)
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi SD206U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi SD206U in the language / languages: English as an attachment in your email.

The manual is 1,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info