1 When you press theF1(F2) switch, the operation mode, set temp, fan speed, flap direction registered to Favorite set 1 or
Favorite set 2 will be enabled.
■ Operation will start even if you press the F1 (F2) switch while the unit is stopped.
■You can change the operation mode, set temp, fan speed, flap direction after the operation has started with the favorite setting operation.
■Following power on, the unit starts to operate initially with the following settings for both Favorite set 1 and Favorite set 2.
Operation mode ...Cooling
Set temp ...28°C
Fan speed ...3-speed
Flap direction ...Position 2
＊When an FDK with a left/right flap is connected
Left/right flap direction ...Center
3D AUTO ...Disabled
■When Change set temp, Change operation mode, Change flap direction, Change fan speed are restricted by the Permission/Prohibition setting,
restricted items will not be reflected to the favorite setting operation.
Favorite setting operation
You can start an operation with the operation mode, set temp, fan speed, flap direction registered to Favorite set 1 and Favorite set 2.
Settings for the operation mode, set temp, fan speed, flap direction can be registered from Favorite setting on the menu.
Favorite setting operation must be set to the F1 or F2 switch.
Menu
Direction
Cooling
16：32
(Mon)
F1: Favorite set 1F2: Favorite set 2
Timer
In operation for running.
Set temp
1 When you press the F1 (F2) switch, the administrator password input screen is displayed.
After you enter the password, the silent mode control will start.
2 During silent mode control, “Outdoor
unit silent mode control ON” will be
displayed on the message display.
3 When you press the F1 (F2) switch during silent mode control, the display
changes to the administrator password input screen. After you enter the password,
the silent mode control will terminate.
■Silent mode control will not be disabled even if you press the Run/Stop switch.
Terminate the control with the F1 (F2) switch.
■This operation is to select enable/disable of silent mode control. You cannot start the
operation with the F1 (F2) switches.
Start the operation with the Run/Stop switch.
■When the sub R/C is set, the silent mode control cannot be used.
■During silent mode control, operation with maximum capacity is not allowed.
Silent mode control
The OU is controlled with priority on quietness. You can start/stop the silent mode control with a single tap of a button. Silent mode control must be set to the F1 or F2
switch. Use the Outdoor unit silent mode timer to set the start and end time.
Menu
Direction
Auto
16：00
(Mon)
F1: Silent mode contF2: Home leave mode
Timer
Outdoor unit silent mode control ON
Set temp
MEETING1
Room
Select the language
Select the language to be displayed on the R/C.
1 Tap the Menu button on the TOP screen and select Useful functions⇒Select the language.
■Depending on how the Permission/Prohibition setting is set, the administrator password input screen may be displayed.
2 The menu for select the language is displayed.
Select the language to be displayed on the R/C and tap the Set button.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Mitsubishi RC-EX3 - REMOTE CONTROL at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Mitsubishi RC-EX3 - REMOTE CONTROL in the language / languages: English as an attachment in your email.
The manual is 6.18 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
Others manual(s) of Mitsubishi RC-EX3 - REMOTE CONTROL
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
