805477

Mitsubishi RC-EX3 - REMOTE CONTROL Manual

40
Zoom out
Zoom in
Previous page
1/46
Next page
−39−−38−
　
1 When you tap the Confirm button on the Timer menu screen, the contents of the current timer settings are displayed.
■When the warming up is set, “ ” is displayed in front of the operation mode on confirmation screen.
■Confirm
Confirm
Back
Timer type
OFF:Hours
No setting
ON:Hours No setting
OFF:Clock No setting
ON:Clock No setting
Weekly
(Wed) ON
Sleep 240min. OFF
Setting status
5:00 PM
Weekly timer
· The Clock setting must be made when the weekly timer is used.
· The weekly timer can be set from the main R/C only.
Advice
1 Tap the Menu button on the TOP screen and select Useful functions ⇒ Weekly timer .
Enter the administrator password if the administrator password input screen is displayed.
■There are cases that the Input password screen is displayed by the Permission/Prohibition setting.
2 When the screen to select the setting range, select a day of the week to be set.
① Weekdays : Monday - Friday
② Sat. Sun : Saturday, Sunday (☞5)
③ All days : Monday - Sunday
④ Each day : Moves to the day of the week setting screen. (☞3)
You can set four on timer and off timer operations for each day of the week.
Weekly timer
Each day
Back
Select the item.
Sat, SunWeekdays
All days
3
12
4
3 When a desired day of the week ① is tapped on the display, contents of current setting for the day are displayed. (☞5)
4 For the holiday setting, tap the block ② under the day to switch between “ ” (the holiday setting) and “(Blank)” (reset).　
Timer does not operate on the day set as holiday.
Two or more holidays can be set.
■To enable the timer on the day set as holiday, it is necessary to reset the holiday setting.
When tapping ③ “All Disable” button, the timer does not operate on all days of the week.
When the timer is used, be sure not to set “All Disable".
5 Screen to check contents of current
setting is displayed.
When the contents are changed or
new setting is added, select a ①
setting line No. and tap the ②
Change button.
2
Weekly timer
Select the day of the week.
Invalid Setting:Tap box below day of week.
If invalid is selected, timer won't start
Back
All Disable
Mon Tue Wed Thu Fri Sat Sun
3
1
6 Detail setting screen for the timer
setting contents is displayed.
① Tap the State button to switch
between “State Enable” and
“State Disable”.
② Tap the Type button to switch
between the “OFF timer” and the
“ON timer”.
③ Select a desired time (at 5-min
intervals) with the
▲ ▼ buttons.
④ In case of “ON timer” when the
Next button is tapped,
operating conditions at the start
of operation can be set. (☞7)
Select a line & tap [Change].
Change
Weekdays
Weekly timer
State
Enable
Enable
Enable
Enable
Type Time
Enter Back
Next
ON
ON
ON
OFF
Mode Fan Temp
AutoAuto
1
2
11:00 AM
0:00 AM
0:00 AM
0:00 AM
Weekly timer
Set Back
State
Enable
Tap ▲▼ to set clock time & tap [Set].
Weekdays:No.1
Next
Type
ON
3
1
2
AM
… 40 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi RC-EX3 - REMOTE CONTROL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi RC-EX3 - REMOTE CONTROL in the language / languages: English as an attachment in your email.

The manual is 6.18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Mitsubishi RC-EX3 - REMOTE CONTROL

Mitsubishi RC-EX3 - REMOTE CONTROL User Manual - German - 46 pages

Mitsubishi RC-EX3 - REMOTE CONTROL Quick start guide - Dutch - 46 pages

Mitsubishi RC-EX3 - REMOTE CONTROL Quick start guide - French - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info