617123

Mitsubishi Lancer - 2014 Manual

344
Zoom out
Zoom in
Previous page
1/434
Next page
Jump-starting the engine
For emergencies 8-3
8
4. Make sure your battery electrolyte is at
the proper level. (Refer to “Checking bat-
tery electrolyte level” on page 9-15.)
5. For vehicles equipped with turbocharger,
remove the air duct and then the battery
upper cover.
(Refer to “Removing and installing the
battery upper cover” on page 9-14.)
6. Connect one end of one jumper cable to
the positive (+) terminal of the discharged
battery (A), and the other end to the posi-
tive (+) terminal of the booster battery
(B).
7. Connect one end of the other jumper cable
to the negative (-) terminal of the booster
battery (B), and the other end to the
engine block of the vehicle with the low
battery (A) at the point farthest from the
battery.
WARNING
If the electrolyte fluid is not visible, or
looks frozen, DO NOT ATTEMPT JUMP
STARTING!!
The battery might split open or explode if
the temperature is below the freezing
point or if it is not filled to the proper
level.
NOTE
Open the terminal cover before connecting
the jumper cable to the positive terminal of
the battery.
(Refer to “Disconnection and connection” on
page 9-16.)
Use the proper cables suitable for the battery
size.
Otherwise heat damage to the cables could
result.
Check the jumper cables for damage and cor-
rosion before use.
WARNING
Be sure to follow the proper order when
connecting the batteries, of:
.
Make sure that the connection is made
to the engine properly. If the connection is
directly made to the negative side of the
battery, the flammable gases from inside
the battery might catch fire and explode,
causing personal injury.
When connecting the jumper cable, do not
connect the positive (+) cable to the nega-
tive (-) terminal. Otherwise sparks can
make the battery explode.
CAUTION
Make sure that the jumper cable will not be
caught in the cooling fan or other moving
parts in the engine compartment.
… 344 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi Lancer - 2014 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi Lancer - 2014 in the language / languages: English as an attachment in your email.

The manual is 60,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info