Manual Mitsubishi Lancer - 2014 (page 49 of 434) (English)

617123

Zoom out

Zoom in

1/434

Child restraint systems

4-20 Seat and restraint systems

2. Route the seat belt through the child

restraint system according to the instruc-

tions provided by the child restraint sys-

tem manufacturer. Then insert the seat

belt latch plate into the buckle. Make sure

you hear a “click” when you insert the

latch plate into the buckle.

3. To activate the ALR child restraint instal-

lation function, slowly pull the shoulder

part of the belt all the way out of the

retractor until it stops. Then let the belt

feed back into the retractor.

4. After the belt has retracted, tug on it. If

the belt is in the ALR function, you will

not be able to pull it out. If the webbing

can be pulled out from retractor, the ALR

function has not been activated and you

will need to repeat steps 3 and 4.

5. After confirming that the belt is locked,

grab the shoulder part of the belt near the

buckle and pull up to remove any slack

from the lap part of the belt allowing the

slack to feed into the retractor. Remember,

if the lap belt portion is not tight, the child

restraint system will not be secure. It may

help to put your weight on the child

restraint system and/or push on its seat-

back while pulling up on the belt (see

illustration).

6. Open the cover from the tether anchor

installation point by pulling it back with

your hand as illustrated below (6).

7. Remove the head restraint from the loca-

tion in which you wish to install a child

restraint system.

If your child restraint system requires the use

of a tether strap, fasten the tether strap in

accordance with the following procedures.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi Lancer - 2014 in the language / languages: English as an attachment in your email.

The manual is 60,3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Mitsubishi Lancer - 2014 Manual

Product: