617123
47
Zoom out
Zoom in
Previous page
1/434
Next page
Child restraint systems
4-18 Seat and restraint systems
4
N00419000185
N00419100157
1. In order to securely fasten the tether strap,
remove the head restraint from the loca-
tion where you wish to install the child
restraint system.
2. Push the anchor connectors (A) on the
child restraint system into the slits (B) in
accordance with the instructions provided
by the child restraint system manufac-
turer. Remember, the lower anchors (E)
provided with your vehicle are designed
to secure suitable child restraint systems
compatible with the LATCH system in the
rear seat only.
3. Open the cover for the tether anchor by
pulling it back with your hand as illus-
trated below (3).
Examples of child restraint sys-
tems compatible with the LATCH
system
A- Rear-facing child restraint system
B- Front-facing child restraint system
C- Child restraint system lower anchor
connectors
D- Tether strap (These are only examples.)
Using the LATCH system
A- Connector D- Vehicle seat cush-
ion
B- Slit E- Lower anchor
C- Vehicle seatback
NOTE
In order to secure a child restraint system
compatible with the LATCH system, use the
lower anchor points in the outboard positions
of the rear seat. It is not necessary to use the
vehicle’s seat belt. The vehicle’s seat belt,
however, MUST be used to secure a child
restraint system in the center position of the
rear seat.
WARNING
If there is any foreign material in or
around the lower anchors, remove it
before installing the child restraint sys-
tem. Also, make sure the seat belt is away
from, not looped through or otherwise
interfering with, the child restraint sys-
tem. If foreign matter is not removed
and/or the seat belt interferes with the
child restraint system, the child restraint
system will not be secured properly, could
detach and move forward in the event of
sudden braking or an accident, and could
result in injury to the child or other vehi-
cle occupants.
When the vehicle is moving, do not adjust
the seat where the child restraint system is
installed.
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi Lancer - 2014 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi Lancer - 2014 in the language / languages: English as an attachment in your email.

The manual is 60,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info