Manual Mitsubishi L75-A94 Laservue (page 30 of 44) (English)

475236

Zoom out

Zoom in

1/44

30 Appendices

For assistance call 1(877) 675-2224

Appendix B: Troubleshooting

Reset Name When to Use How to Use Resulting Action

Format If the picture shape

seems incorrect, use

the

FORMAT

key to

change the picture

shape.

Press

FORMAT

to cycle through the

picture shapes available for the

signal.

he last-used format for the signal

type will be recalled on the input.

Note: Also check the aspect

ratio feature on your cable box or

satellite receiver as this may be

altering the picture.

PerfectColor

™

PerfecTint

™

Reset

(for the single

current input)

When the color

intensities seem out

of balance, use the

PerfectColor/PerfecTint

reset to reset the color

balances to the original

factory settings.

Both PerfectColor and

PerfecTint are reset at

the same time.

1. While viewing the input to reset,

press

and go to Picture >

Perfect.

2. Press

ENTER

to display the

PerfectColor adjustment screen.

3. Press

CANCEL

to reset the colors.

All PerfectColor/PerfecTint

sliders are reset to the original

center position. The PefectColor/

PerfecTint settings for other

inputs remain unchanged.

A/V Memory

Reset

(for the single

current input)

When audio and/or video

settings for a single input

seem incorrect, use A/V

Memory Reset to return

the input to the original

factory settings.

1. While viewing the input to reset,

press

and go to Picture >

Reset.

2. Press

to highlight Reset.

3. Press

ENTER

again to reset.

Most Audio and Video settings

for the individual input are reset

except for the global settings

for audio Balance, Listen To,

Language, Smooth120 (Smooth

120 Film Motion), and Advanced.

A/V Reset

(for all inputs)

To reset audio and

video adjustments for

all inputs to the original

factory settings.

While viewing the TV, press the

control-panel buttons

INPUT

and

VOLUME DOWN

at the same time for at

least two seconds.

Most Audio and Video settings

are returned to the original

factory settings, including global

settings not affected by Picture

> Reset. Settings under Picture

> Advanced are unaffected.

Channel

Memorization

To erase and re-mem-

orize channels on the

ANT

input.

1. Press

and go to Setup >

Channel.

2. Highlight the reception mode,

e.g. Ant Air, and press

ENTER

3. Highlight All Channels and

press

ENTER

4. Highlight Scan.

5. Press

ENTER

to start channel

memorization.

All previously memorized chan-

nels for the antenna input are

erased and a new set of memo-

rized channels is created. All

channel information in the

FAV menu, ChannelView, and

Channel Lock is deleted. To add

or delete individual channels,

use the Setup > Channel > Edit

menu.

Lock Menu

Pass Code

To change your Lock

menu pass code

Press the

and

LAST

keys simultaneously to temporarily unlock the TV. See

the supplemental Owner’s Guide at www.mitsubishi-tv.com for more.

TV Re set Comparison Guide

You can resolve many common TV problems using the

reset functions described in the following table.

IMPORTANT

Before you change sound or picture settings: If

picture or sound settings seem wrong for a broadcast

channel (a channel from the

ANT

input, a cable box, or

satellite receiver), first check other channels from the

same input before changing settings. If most other

channels from the same input seem correct, there is

likely a problem with the broadcast rather than with the

TV. Use care in this case, as changes you make to fix

problems on individual channels also affect all other

channels on the same input.

Note

Additional troubleshooting tips are in the supplemen-

tal Owner’s Guide at www.mitsubishi-tv.com.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi L75-A94 Laservue in the language / languages: English as an attachment in your email.

The manual is 2,48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Mitsubishi L75-A94 Laservue Manual

Product: