475236

Mitsubishi L75-A94 Laservue Manual

29
Zoom out
Zoom in
Previous page
1/44
Next page
Appendices 29
For assistance call 1(877) 675-2224
Appendix A: Auto Input Sensing
About Auto Input S ensing
This TV’s Easy Connect™ Auto Input Sensing feature
detects the following connections automatically:
• Analog video jacks
• HDMI inputs (when powered on)
• USB device containing photo and music files (JPG
and MP3 formats).
Auto Input Sensing for Most Devices
When you first connect a device, the TV will:
a. Detect the connected device and automati-
cally switch to it.
b. Prompt you to identify the device type.
c. Repeat these steps for other newly detected
devices.
When You First Connect a Device
• Most Device Types. Select the device type from
the on-screen list. The device type you select here
will appear as an icon in the Input Selection menu.
• A/V Receiver.
For an HDMI-equipped A/V
receiver, select AVR
from the list of device types if
the A/V receiver is not recognized automatically.
• HDMI CEC Devices Compatible with the
TV’s HDMI Control Feature.
Compatible
CEC-enabled HDMI devices are often recognized
automatically by the TV.
HDMI Control may allow
you to control some functions of a CEC-enabled
device. See the supplemental Owner’s Guide at
www.mitsubishi-tv.com.
New Device Found screen for a device with HDMI
control enabled. Select On if you want to enable the
TV’s HDMI control of the device. In some cases, as
in the example, you will also be prompted to select a
device name.
Tips on Auto Sensing
• Choose a different name for each input.
• The antenna (
ANT
) input is never detected. It can
be turned off in the Inputs > Name menu.
• Change the device type displayed in the Input
Selection menu by using the Inputs > Name
menu.
• Some HDMI devices can automatically tell the TV
what name to use in the Input Selection menu
and you will be unable to change the name.
• The TV is unable to detect a new connection if the
current input is USB or internet. Switch to a dif-
ferent input before connecting.
Reactivating Auto Input Sensing for an HD MI Input
After you disconnect an HDMI device, Auto Input
Sensing is temporarily disabled and the disconnected
device still appears in the Input Selection menu.
Perform these steps:
1.
Power off the device.
2.
Disconnect the HDMI cable.
3.
Press
MENU
on the TV remote control to enter the
TV main menu.
4.
Go to Inputs > Name.
5.
Highlight the HDMI input name and press
ENTER
to
select Delete.
6.
Press
EXIT
to clear the menus.
Inputs > Name menu with Delete selected for
HDMI-3.
7.
Connect the new device and the New Device
Found screen will display.
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi L75-A94 Laservue at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi L75-A94 Laservue in the language / languages: English as an attachment in your email.

The manual is 2,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info