31038
46
Zoom out
Zoom in
Previous page
1/80
Next page
44
IMPORTANT
You cannot transfer the PlusCode number while the VCR is recording or on
recording pause mode.
If the VCR memory is full, Program memory is full will appear for 8 seconds,
and then the Recap screen will appear. Use CANCEL to erase an entry
before you can add another one.
If the code number you entered is wrong, The PlusCode number is not valid
will display on the screen for 8 seconds, and then the VCR Plus+ system
menu will appear.
If two programmed recording times overlap, VCR is already programmed for
that time will display on the screen for 8 seconds. You will need to erase the
previous program before you can enter the new one.
If the remote control has failed to transfer the data, The transfer has failed.
Please transfer again will be displayed on the screen for 8 seconds. To
transfer the same PlusCode number again, press TRANSFER twice.
Pressing TRANSFER once displays the PlusCode number on the remote
control LCD again, and pressing it again transfers the displayed PlusCode
number.
7 To program additional recording times, follow the procedure from step 2 to 6
again.
8 When you are finished with all programming, check the following:
If you have a cable box, a digital cable box, a PRIMESTAR
®
or a DISH
Network
satellite receiver, leave the cable box or receiver turned ON.
If your VCR does not control your cable box, leave the box tuned to the
station you wish to record.
Turn the VCR power OFF and make sure the programmed recording light is
lit.
IMPORTANT
To cancel VCR Plus+ System Programming while programming with the
remote control LCD, press VCR Plus+.
To cancel VCR Plus+ System Programming while displaying the Recap
screen, press CANCEL to cancel the selected program, and then press
MENU to exit the Program to record.
Timer Recording
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi HSHD2000U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi HSHD2000U in the language / languages: English as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info