604759
33
Zoom out
Zoom in
Previous page
1/40
Next page
31
Control
7.0 [N] Clock
Menu 7.1 [N] Date
The current date is set here.
Menu 7.2 [N] Time
Here the current time is set.
Menu 7.3.0 [U] Temp set back
Settings, e.g. for night reduction can be selected in the
submenus to this menu.
Menu 7.3.1 [U] Set back time
The time for the set back operation, e.g. night reduction is
chosen here.
Menu 7.3.2 [U] Set back temp +/-
Changes of the heat curve during set back operation period, e.g.
the night reduction is set here.
Setting range: -10 – 10
Default value: 0
Menu 7.3.3 [U] Heating system
The heating system to apply the set back operation is selected
here. If heating system 2 is present the menu can be set to
Off , “System 1”, System 2 or System 1+2. In other
cases only “Off” and “System 1” can be selected.
Setting range: Off, System 1, System 2, System 1+2
Menu 7.3.4 [U] Return
Return to menu 7.3.0.
Menu 7.4.0 [U] Extra hot water
Settings are made in the sub-menus of this menu when extra
hot water is required on a specic day.
Menu 7.4.1 – 7.4.7 [U] XHW Monday – XHW Sunday
Here you select the period for respective days when extra hot
water should be activated. Hours and minutes for both start and
stop are shown. Equal values mean that extra hot water is not
activated. Time can be set past midnight.
Setting range: 00:00 – 23:45
Menu 7.4.8 [U] Return
Return to menu 7.4.0.
Menu 7.5.0 [U] Vacation set back
Holiday settings are made in the sub-menus to this menu.
When the holiday function is active, the calculated supply line
temperature is reduced according to the setting and hot water
charging can be switched off.
When the holiday function is deactivated, the heat pump operates
hot water for an hour, before periodic extra hot water is activated
(even if periodic extra hot water is activated in menu 1.7).
Note!
The holiday setting does not deactivate cooling.
Menu 7.5.1 [U] Vacation begins
The start date for holiday changing is set here. The date is
changed by pressing the enter button. The holiday change starts
applying at 00:00 on the selected date.
Same date in menu 7.5.1 and 7.5.2 deactivates the holiday function.
Menu 7.5.2 [U] Vacation ends
The end date for holiday changing is set here. The date is
changed by pressing the enter button. The holiday change stops
applying at 23:59 on the selected date.
Same date in menu 7.5.1 and 7.5.2 deactivates the holiday function.
Menu 7.5.3 [U] Heating system
The heating system to apply the vacation set back is selected
here. If heating system 2 is present the menu can be set to “Off ”,
“System 1”, “System 2” or “System 1+2”. In other cases only
“Off” and “System 1” can be selected.
Setting range: Off, System 1, System 2, System 1+2
Menu 7.5.4 [U] Offset heating curve
How much the heating curve is to be offset during the holiday
period is set here.
If the relevant heating system has a room sensor, the change is
given in degrees.
Setting range: -10 – 10
Menu 7.5.5 [U] HW off
You can choose if hot water operation is cancelled during the
holiday period
Setting range: No, Yes
Menu 7.5.6 [U] Return
Return to menu 7.5.0.
Menu 7.6.0 [N] Silent mode
Setting is made in the sub-menu of this menu if Silent mode is
activated on a certain period.
When the silent mode is activated, maximum compressor speed
and fan speed in outdoor unit is reduced in order to make the
noise smaller.
Take note that the capacity is reduced by around 30% during silent mode.
It is valid in heating mode only.
Menu 7.6.1 [N] Silent mode time
Here you select the period when the silent mode should be
activated. Hours and minutes for both start and stop are shown.
Equal values mean that the silent mode is not activated. Time
can be set past midnight.
Setting range: 00:00-23:45
Menu 7.6.2 [N] Return
Return to Menu 7.6.0
Menu 7.7 [N] Return
Return to menu 7.0.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi HMS140VA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi HMS140VA in the language / languages: English as an attachment in your email.

The manual is 2,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info