604756
28
Zoom out
Zoom in
Previous page
1/40
Next page
26
Control
2.0 [N] Supply temp.
Menu 2.1.0 [N] Heating settings
Heating settings are made in the sub-menus for this menu.
Menu 2.1.1 [N] Offset heating/Total
The selected heating curve offset is shown here.
The total offset of the heat curve is also shown here. It
includeschedule, outer compensation and any room control.
Note! The value is changed using the Heating curve offset”
knob.
Setting range: -10 – 10
Menu 2.1.2 [N] Heating curve
The selected heating curve is shown here. At value 0, the
function “Own heat curve” is activated, see menu 2.1.3.0.
Setting range: 0 – 20
Menu 2.1.3.0 [U] Own heating curve
Here you can select your own curve definition. This is an
individual linear curve with one break point. You select a break
point and the associated temperatures.
Note! The “Heating curve” in menu 2.1.2 must be set to 0 to
activate this function.
Menu 2.1.3.1 [U] Supply temp.at +20
The supply temperature at an outdoor air temperature of
+20 °C is selected here.
Setting range: 0 – 80* °C
* Limited by menu 2.3 Max supply temp.
Menu 2.1.3.2 [U] Supply temp.at -20
The supply temperature at an outdoor air temperature of -20 °C
is selected here.
Setting range: 0 – 80* °C
* Limited by menu 2.3 Max supply temp.
Menu 2.1.3.3 [U] Buckling temperature
Here you select at what outside air temperature the break point
shall occur.
Setting range: -15 – 15 °C
Menu 2.1.3.4 [U] Supply t. at buckl.
You set the calculated supply temperature for the break point
here.
Setting range: 0 – 80* °C
* Limited by menu 2.3 Max supply temp.
Menu 2.1.3.5 [U] Return
Return to menu 2.1.3.0.
Menu 2.1.4 [U] Min supply heating
The set minimum level for the supply temperature to the
heating system is shown here.
The calculated flow temperature never drops below the set
level irrespective of the outdoor temperature, heating curve or
its offset heating curve.
Setting range: 20 – 65 °C
Menu 2.1.5 [U] Circ-pump speed heat
The speed of the circulation pump during space heating is
selected here.
Setting range: 1 – 100
Menu 2.1.6 [N] Return
Return to menu 2.1.0.
Menu 2.2.0 [N] Cooling settings
Cooling settings are made in the sub-menus for this menu.
Menu 2.2.1 [N] Offset cooling/Total
The selected cooling curve offset is changed here.
The total offset of the cooling curve is also shown here. It
includes schedule, outer compensation and any room control.
Setting range: -10 – 10
Menu 2.2.2 [N] Cooling curve
The selected cooling curve is shown here. At value 0, the
function “Own cooling curve” is activated, see menu 2.2.3.0.
Setting range: 0 – 3
Menu 2.2.3.0 [U] Own cooling curve
Here you can select your own curve denition.
Note! The cooling curve in menu 2.2.2 must be set to 0 to
activate this function.
Menu 2.2.3.1 [U] Supply temp.at +20
The supply temperature at an outdoor air temperature of +20 °C
is selected here.
Setting range: 0 – 25* °C
* Limited by menu 2.2.4 Min supply cooling.
Menu 2.2.3.2 [U] Supply temp.at +40
The supply temperature at an outdoor air temperature of +40 °C
is selected here.
Setting range: 0 – 25* °C
* Limited by menu 2.2.4 Min supply cooling.
Menu 2.2.3.3 [U] Return
Return to menu 2.2.3.0.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi HMA100VM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi HMA100VM in the language / languages: English as an attachment in your email.

The manual is 2,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info