549872

Mitsubishi HC8000D Manual

50
Zoom out
Zoom in
Previous page
1/55
Next page
EN-50
Troubleshooting (continued)
Others (continued)
Problem Solution
Images are not 3D.
* The 3D glasses and
3D emitter are sold
separately. They are
not supplied with this
product.
• Itmayneedtoswitchthe3Dmode(suchas3Dsettingsystem)oftherecorder/player
when projecting 3D images with the 3D image supporting recorder/player. (For detail,
see the User Manual of the recorder/player.)
• Isthe3Dmodeoftheprojectorsetproperlyfortheimage?
Set the 3D MODE of the projector (FRAME PACKING, SIDE BY SIDE, TOP AND
BOTTOM) properly for the image.
• The3Dglassesmaybecomeoutofsyncduetouorescentlight.Turnoffthe
fluorescent light.
• Isthereanyother3Demitteror3Dimagesupportingtelevisionclosetothe3D
glasses?
The 3D glasses work by receiving signals from the 3D emitter. Check that there is
no interference of the signals from other infra-red emission section.
• Is the signal output from the 3D emitter being stopped temporarily because you
pressedthe3DSYNCPAUSEbuttonontheremotecontrol?(Seepage26.)
The power of the
3D glasses turns off
automatically.
* The 3D glasses and
3D emitter are sold
separately. They are
not supplied with this
product.
• Isthereanyblockinthecommunicationareabetweenthe3Demitterandthe3D
glasses?Or,isthereastickerorothersuchitemontheinfra-redreceptionsectionon
the3Dglasses?
When the signal from the 3D emitter is interrupted, the power of the 3D glasses
automatically turns off 5 minutes after the interruption. Check that there is not any
block in the communication area between the 3D emitter and the 3D glasses.
There is something
wrong with the 3D
images.
* The 3D glasses and
3D emitter are sold
separately. They are
not supplied with this
product.
• Dependingonthe3Dimagestatus,youmayfeelsomethingwrongwiththe3D
images.
Switch the 3D SYNC. setting of the projector to check whether or not the
uncomfortable feeling is disappeared.
When the signal from the 3D emitter is interrupted, the power of the 3D glasses
automatically turns off 5 minutes after the interruption. Check that there is not any
block in the communication area between the 3D emitter and the 3D glasses.
• The3Dglassesmaybecomeoutofsyncduetouorescentlight.Turnoffthe
fluorescent light.
• Isthereanyother3Demitteror3Dimagesupportingtelevisionclosetothe3D
glasses?
The 3D glasses work by receiving signals from the 3D emitter. Check that there is
no interference of the signals from other infra-red emission section.
The indicator on the
3D glasses does not
light up even if the
power is turned on.
* The 3D glasses and
3D emitter are sold
separately. They are
not supplied with this
product.
• Doesthebatteryofthe3Dglassesdie?
Replace the battery with a new one if the indicator does not light up even when the
power is turned on.
Blue shades appear in
the 3D image.
• Adjust3DF.R.C.LEVELofthe3DmenuintheIMAGEmenu.(Seepage25.)
• AdjustFINE3DSYNC.ofthe3DmenuintheIMAGEmenu.(Seepage25.)
If the following problem occurs after the lamp is replaced, check the following first.
Problem Solution
The projector does not
turn on.
• Fit the lamp cover securely. (See pages 42 - 44.)
• Resetthelampoperatingtime.(Seepage44.)
The STATUS indicator
blinks.
• Resetthelampoperatingtime.(Seepage44.)
… 50 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi HC8000D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi HC8000D in the language / languages: English as an attachment in your email.

The manual is 7,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info