549872

Mitsubishi HC8000D Manual

48
Zoom out
Zoom in
Previous page
1/55
Next page
EN-48
Troubleshooting (continued)
Images are not displayed correctly. (continued)
Problem Solution
Fine streaks are seen
on projected images.
• Thisisduetointerferencewiththescreensurfaceandisnotamalfunction.Replace
the screen or displace the focus a little.
• Verticalorhorizontalstreaknoisemayappearontheprojectedimage,dependingon
the type of the DVD player or game console you use. In such a case, you can reduce
such streak noise by enabling the LPF. (See page 40.)
Projected images
become wavy.
• Connecttheplugsofthecablestoexternaldevicessecurely.
• Keeptheprojectorawayfromdevicesthatemitinterferingradiowaves.
Hue is not appropriate. • Checkthatthecablesconnectedtotheexternaldevicesarenotbroken.
Tint in projected
images is incorrect.
• IfthesettingofCOMPUTERINPUTintheSIGNALmenuisinconsistentwiththeRGB/
YCbCr output setting of the external device even when the input source is other than
COMPUTER (for example, when the input source is HDMI), the entire image appears
reddish or greenish.
Check that COMPUTER INPUT in the SIGNAL menu is correctly set. (See page
34.)
• Checkthatthecableconnectedtotheexternaldeviceisn’tbroken.
Different color tint. • Whencomparingimagesprojectedbytwoprojectors,tintsinthedisplayedimages
may be different because of variation between their optical components. This is not a
malfunction.
• Whencomparingtheimageprojectedbythisprojectorwiththosedisplayedonthe
television or PC monitor, tints in the displayed images may be different because of
difference in the range of color reproducibility. This is not a malfunction.
Color unevenness
appears in images.
• Sincetheprojectorutilizesahigh-denitionDLP™chip,colorvariations(atthecenter
of the screen and along the rims of the active area) that are caused by diffraction of
light may occur. This is not a malfunction.
Only the motion areas
in the images supplied
from the computer
aren’t displayed.
• Thisiscausedbythecomputerbeingused.Contactthemanufacturerofyour
computer.
Projected images are
obscured.
• Matchtheoutputresolutionofyourcomputerwiththeresolutionoftheprojector.
For the method to change the output resolution of the computer, contact the
manufacturer of your computer. (See page 53.)
Image remains
freezing.
• WhenimagefromVCRisprojected,itmayremainfreezingduringspeedsearch.This
is not a malfunction.
Noise appears around
the image.
• InsomeimagessuchasDVD,noisemayappeararoundtherecordedimage.Inthis
case, decrease the setting value of OVER SCAN of the SIGNAL menu or adjust the
setting value of SHUTTER of the SIGNAL-USER menu. (See page 34.)
Projected images are
flickering.
• AfterthePOWERbuttonorONbuttonontheremotehasbeenpressed,ortheLamp
mode setting has changed, images may be flickering until the lamp lights stably. This
is an expected behavior.
• WhenselectingtheinputsignalandAutoPosition,theprojectedimagemaybe
flickering temporarily. This is not a product malfunction.
Others
Problem Solution
No sound comes
from the speakers
connected to the AV
amplifier. (No sound
comes from the
home theater system
speakers.)
• Theprojectorisnotequippedwiththespeakers.TheAVamplierreadsthe
information that projector is not equipped with the speakers and then passes this
information along to the DVD player. Because of this, either the DVD player may be
temporarily stopping audio output, or the AV amplifier may be temporarily stopping
audio output from the DVD player.
Change the setting on the AV amplifier or the DVD player.
The exhaust vents
emit warm air.
• Thisaircomesoutaftercoolingtheinsideoftheprojector.Youmayfeelhot,butthis
is not a malfunction.
… 48 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi HC8000D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi HC8000D in the language / languages: English as an attachment in your email.

The manual is 7,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info