549872
26
Zoom out
Zoom in
Previous page
1/55
Next page
EN-26
Viewing 3D images (continued)
FINE 3D SYNC.
If you feel something wrong with or find ghosts
in the 3D image being displayed, the open/close
timing of the lens (liquid crystal shutter) of the 3D
glasses may be out of sync with the displayed
image. In such a case, adjust the setting of FINE
3D SYNC.
3D GLASSES (for HC8000D only)
When using the 3D glasses EY-3DGS-80U (or EY-
3DGS-78U) sold separately, select HIGH SPEED.
When using the general-purpose liquid crystal
shutter 3D glasses, select NORMAL.
24P FRAME RATE
When you are annoyed with flicker in a bright area
in the image when a 1080p24 frame packing signal
is input, select 120Hz.
• When24PFRAMERATEissetto120Hz,
the motion interpolation by the frame rate
conversion isn’t performed while a 3D image is
displayed.
3D F.R.C. LEVEL
You can control the effect level of the motion
interpolation by the frame rate conversion while a
3D image is displayed.
• Themotioninterpolationto3Dimagesworks
only when a 1080p24 frame packing signal is
input.
To stop the signal emitted from the 3D emitter
temporarily:
While you are viewing a 3D image, the remote control
of your DVD recorder or other apparatus may not work
properly. In such a case, stop the signal emitted from
the 3D emitter temporarily by pressing the 3D SYNC
PAUSE button on the remote control of the projector.
Note that while the signal is stopped, a warning
message appears and images aren’t displayed in the
3D mode.
To convert 2D images to 3D images:
With the remote control:
1. Project a 2D image.
2. Press the 3D MODE button.
3. Press the t or u button to select AUTO and
press the ENTER button.
4. Press the 2D-3D button.
5. Press the t or u button to select ON.
• Now2Dimagesareconvertedinto3Dimages.
6. Turn the power switch on the 3D glasses to ON and
wear the 3D glasses.
7. Press the ENTER button.
• Thescreenforadjustingthedepthofthe
converted 3D images will appear.
8. Adjust the depth of the converted 3D images by
pressing the t or u button.
• Youcanselectthedepthfrom10levels(1to
10). As the level increases, the appearance of
depth is enhanced.
• Tonishtheconversionto3Dimages,pressthe
2D-3D button and then press the t or u button
to select OFF.
With the 3D menu:
(See page 29 for menu setting.)
1. Project a 2D image.
2. Display the IMAGE menu.
3. Select 3D by pressing the p or q button and press
the ENTER button.
• The3Dmenuwillappear.
4. Select 3D MODE by pressing the p or q button.
3D
OFF
NORMAL
3D SYNC.
0
FINE 3D SYNC.
96Hz
24P FRAME RATE
HIGH SPEED
3D GLASSES
2
3D F.R.C. LEVEL
2D-3D
CONVERSION
5
3D DEPTH
3D MODE
AUTO
5. Set 3D MODE to AUTO by pressing the t or u
button and then press the ENTER button.
6. Reapeat steps 2-3 to display the 3D menu again.
7. Select 2D-3D CONVERSION by pressing the p or
q button.
3D
OFF
NORMAL
3D SYNC.
0
FINE 3D SYNC.
96Hz
24P FRAME RATE
HIGH SPEED
3D GLASSES
2
3D F.R.C. LEVEL
2D-3D
CONVERSION
5
3D DEPTH
3D MODE
AUTO
8. Set 2D-3D CONVERSION to ON by pressing the t
or u button.
• Now2Dimagesareconvertedinto3Dimages.
9. Turn the power switch on the 3D glasses to ON and
wear the 3D glasses.
10. Select 3D DEPTH by pressing the p or q button.
3D
OFF
NORMAL
3D SYNC.
0
FINE 3D SYNC.
96Hz
24P FRAME RATE
HIGH SPEED
3D GLASSES
2
3D F.R.C. LEVEL
2D-3D
CONVERSION
5
3D DEPTH
3D MODE
AUTO
11. Adjust the depth of the converted 3D images by
pressing the t or u button.
• Tonishtheconversionto3Dimages,set2D-
3D CONVERSION back to OFF.
Important:
• Iftheviewingdistanceisnearerthanthe
recommended distance, it will cause physical
discomfort and eye fatigue.
• The3Dglassesmaynotworkproperlywhenitis
used too far from the screen.
• Watchthecontentsinfrontofthescreen,notatbig
angle. If you are viewing the screen at big angle,
you may not be able to view 3D contents correctly.
• Therearepersonaldifferencesinviewingthe3D
images. For persons with myopia, hypermetropia,
astigmatism or left and right sights, please wear
glasses to correct them then wear the 3D glasses.
• Thepictureseemsmisplacedatthestartof
projecting the 3D images, however, this is not a
malfunction.
• 3Dimagesconvertedfrom2Dimagesappear
blurred due to conversion.
•
While side-by-side or top-and-bottom 3D images are
displayed, the aspect ratio setting is fixed to 16:9.
• Whenyoudisplayamenuordialogwhileviewing
side-by-side or top-and-bottom 3D images, they
are displayed in the 2D mode temporarily. When
the menu or dialog disappears, they are displayed
in the 3D mode again.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi HC8000D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi HC8000D in the language / languages: English as an attachment in your email.

The manual is 7,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info