465667
8
Zoom out
Zoom in
Previous page
1/11
Next page
LOADING AND PLAYING THE DISC
1) Slide the FUNCTION switch to select CD (AUX) mode.
2) Open the CD door by lifting the position marked OPEN/CLOSE on the CD door.
3) When the disc compartment has opened, remove a disc from its case and place it
carefully onto the tray with the label side facing outwards.
4) Press down on the CD door until it latches into the closed position.
5) When the compartment is fully closed, the disc will be read automatically. The total
number of the music tracks on the current disc will be shown on the display. The
icon ”no” will be displayed on LCD display when no disc is in loaded in the unit.
6) Press the play/pause button on the unit to start the playback, and then the first track
number of the current disc will be displayed.
Press the play/pause button again to pause the
track; the track number will be flashed on the
display and the Play/PROG lamp will switch off,
press it again to resume the playback from the
same point.
7) Adjust the volume control know to the desired level.
8) Press the Stop button to stop playback. Total track number will show on the display. The
CD player will also stop when:
- The CD door is opened.
- The disc has reached the end.
- The unit is selected to another mode Radio mode.
SKIP A TRACK AND HIGH-SPEED MUSIC SEARCH
1. During playback, go back to the beginning of the current track by pressing the Previous
button. Go back to the previous track by pressing the CD Previous button repeatedly. Go to
the next track by pressing the CD Next button once or repeatedly to play your desired track.
2. During playback, press and hold the previous button or next button to skip/ search through
a track at high speed. When you release the button, the track will resume playing normally
from that point.
DON’T FORGET! Keep the disc compartment closed when the unit is not in use to prevent
dirt and dust from entering the mechanism. Never place more than one
disc into the disc compartment at any time.
Play
Mode
1.) To repeat the current track during the playback, press the REPEAT
button once. The repeat indicator will be flashing.
2.) To repeat all tracks in the current disc, press the REPEAT button twice.
The repeat indicator will be steadily on.
3.) Press the REPEAT button for three times to cancel the repeat play
mode. The repeat indicator will go off.
4.) This product allows you to play all tracks on the disc in random order during the playback
or stop mode, you can press the RANDOM button on the unit once to start random play;
press the RANDOM button again to cancel the random play and start the normal play. you
can also press the stop button to stop random play.
- - 8 - -
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MiTone MITRC100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MiTone MITRC100 in the language / languages: English as an attachment in your email.

The manual is 0,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info