43 42
2G/3G Mode
In the menu option “2G/3G” you can select the speed
at which images are sent via a mobile network. Go to
“Main Menu” by pressing the menu button (15) and
select the menu option “2G/3G mode”. T his is located
under the third tab “Mobile service settings”. Press
the OK button (11) or the right arrow k ey (11) to access
the submenu. Here you have the option to choose be-
tween “ Auto”, “3G” and “2G”. If you select “ Auto”
the camera decides autonomously whether images are
sent via “3G” or “2G”. If you select “3G” the images
are sent via the fast HPSA/+ network. If you select
“2G” the camera sends the images via the slower
GSM network. Confirm your selection with OK (11).
T o return to the previous menu option without chang-
ing the settings , press the left arrow k ey (11).
Note: If in your country the mobile network does
not support the GSM standard, always select the
“3G” setting.
Download T ool
See the instructions under “Mobile Phone Settings
using the Download T ool Software”.
Photo Quality
Y our DTC 1100 allows you to change the quality of the
sent images . F or everyday use, the “Normal” quality
setting is sufficient. If you select “High”, the camera
will require longer to send the images , and also there-
fore consume more energy . Go to “Main Menu” by
pressing the menu button (15) and select the menu
option “Photo Quality”. T his is located under the third
tab “Mobile Service Settings”. Press the OK button
(11) or the right arrow k ey (11) to access the submenu.
Here you have the option to choose between “Nor -
mal” and “High”. Confirm your selection with OK (11).
T o return to the previous menu option without chang-
ing the settings , press the left arrow k ey (11).
Remote Control
T his function allows you to change certain settings
of the DTC 1100 via an SMS text message (see section
“Remote Control”, Fig. 11,12,13). Y ou can program
the camera so that the message is read every day at
a defined time (once) or accepted by the camera
24 hours (24 hr). If you do not want to activate the
remote control, select “Deactivate”. Go to “Main
Menu” by pressing the menu button (15) and select
the menu option “Remote control”. T his is located
under the third tab “Mobile Service Settings”. Press
the OK button (11) or the right arrow k ey (11) to
access the submenu. In the submenu, you can select
between “Deactivate”, “Once” and “24 hr” using the
up/down arrow k eys (11). If you have selected “Once”,
you can specify the receiving time by using the up/
down arrow k eys (11) and confirming with OK (11).
T o continue to the next step, press the left or right
arrow key (11). Confirm your settings with OK (11).
T o go back to the “Manual controls” without saving
the entries , use the menu button (15).
Connecting the Camera
to a Computer
T here are two ways of transferring the data to your
computer: either you can take out the SD card and
read it on the computer or you can connect the
DTC 1100 to your computer using a USB cable
in cluded in the package .
Connect using the USB Cable
Always ensure that the camera is switched off before
you connect it to your computer . Connect your camera
to the computer using the included USB cable via the
USB cable slot (14). Switch on the camera. T he camera
will be recognized as a removable medium, pictures
or video clips can be directly viewed or transferred to
the PC.
T ransferring Pictures and Videos via SD Card
Always ensure that the camera is switched off before
the SD card is removed from the camera slot (9),
else the memory could be damaged. T ake the memory
card from the slot (9) in the camera and insert it in
the memory card reader connected to your computer .
Some computers also have an internal slot for SD
cards . In such a case , the SD card can be directly con-
nected to your computer . The pictures or video clips
can now begin to be transferred to the computer .
MPEG-4 Visual Patent
Portfolio License
T his MINOX DTC 1100 is licensed under the MPEG-4
Visual P atent Portfolio License for personal and
non-commercial purposes to
1. encode video in compliance with the MPEG-4
standard and/or
2. decode MPEG-4 video that w as encoded by a con-
sumer engaged in a personal and non-commercial
activity and/or was obtained from a video provider
licensed to provide MPEG-4 video . F or other pur-
pose s , no license is granted or implied for the
MPEG-4 standard.
Further information can be obtained from MPEG LA,
LLC on http://www .mpegla.com
T echnical Data
Image Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 MP Hardware Resolution, CMOS Sensor
Image Resolution . . . . . . . . . . . . . . . . . . . . . . . . adjustable: (4:3) 8 MP , 5 MP , 3 MP oder (16:9) 6 MP , 4 MP , 2 MP
T rigger Release ...................................................................... < 1 sec.
Cellular Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4G (HSPA+) / GSM
Photo Burst............................................ 1 – 5 Photos per Shutter Release (adjustable)
Video Resolution.................................................... 1280x720 HD; 640 x 480 VGA
Video Length............................................................ 5 – 30 sec. (adjustable)
High P ower IR Flash ......................................................... Range 18 m / 59 ft.
PIR-Sensor................................................................3 Step Multi-Zone PIR
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2" TFT Color Display
Day Shots .............................................................................Color
Night Shots ................................................................... Black and White
User friendly Interface......................................................6-button Control P anel
Real-time Screen Display .................................................... Photo/video Playback
Settings................................... Date, Time , T emperature, Lunar Phases on each Image/Video
External Memory...................................................SD/SDHC Card with up to 32 GB
P orts .................................. USB P ort, 6 Volt/9 Volt for External P ower Supply (min. 2000 mA)
Cables................................................................... USB Cable (included)
Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 x 1.5 V AA Batteries / Alkaline, Li-Ion or NiMH
P assword Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-digit Combination
Mounting Aid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Strap
Dimensions (H x W x D)..........................................101 x 149 x 55 mm / 4 x 5.9 x 2.2 in.
Weight (without batteries) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 406 g / 14.3 oz.
Order Number..................................... 60718 – DTC 1100 brown, 60719 – DTC 1100 camo
W arranty T erms
With the purchase of the MINO X DTC 1100, you have
purchased a product that has been manufactured and
tested in accordance with particularly stringent quality
standards . T his product is covered by a warranty of
2 years from the date of purchase and is subject to the
following conditions:
1. During the w arranty period, complaints based on
manufacturing defects will be corrected at the sole
discretion of MINO X GmbH by repair , replacement
of defective parts or replaced completely by an
equally flawless product. Further claims of any kind
and regardless of legal reasons in connection with
this warranty are excluded from the w arranty terms.
2. Warranty claims are invalid if the defects are due to
improper treatment caused by use of other accesso-
ries , intervention by unauthorized persons or work-
shops , or if the serial number has been manipulated
or destroyed.
3. W arranty claims can only be made upon presentation
of the original receipt from an authorized dealer .
4. T o mak e a warranty claim, please return the MINOX
DTC 1100 along with the original receipt and a full
description of the defects to the MINO X customer
service or a local MINO X representative.
5. If necessary , tourists may claim the full warranty
if the proof of purchase is presented to a MINO X
representative in the respective country .
MINO X GmbH
W alter -Zapp-Str . 4
D-35578 Wetzlar
T el.: +49 (0) 6441 / 917-0
F ax: +49 (0) 6441 / 917-612
eMail: info@minox.com
Internet: www .minox.com