472291

Minolta 5600 Manual

75
Zoom out
Zoom in
Previous page
1/194
Next page
Adjustment Procedures MINOLTAFAX 5600
3-32
3.6 Setting Individual Autodialer Attributes
This function allows the user to configure an individual one-touch or speed dial entry with the settings
shown in Memory Switches B:0, B:1, B:2 and B:3.
To set the individual attributes:
1. Change Memory switch B:5, bit 7 to a “1”. (See setting 3.3.1 Setting the Memory Switches for more
information on changing Memory switch B:5.)
2. When the function is enabled, an “Attribute” option is added to the autodialer programming steps. As a
one-touch or speed dial location is programmed, an extra step showing Attribute 1, Attribute 2,
Attribute 3, and Attribute 4 are added as the last step.
01:Attribute1
10001101
Bit No. 76543210
3. Set the individual bit positions as shown in the following table. To change a setting, press
or
/PROGRAM
until the cursor is the below the desired bit position; then press “
1”
or “
0”
to make the
change.
4. Press
ENTER
to save the setting of the displayed attribute and advance to the next attribute.
5. To set the other attribute, repeat steps 3-4.
6. When the last attribute is set, the fax will advance to the next autodialer programming steps.
Attribute 1 - Individual Autodialer Setting
(Equivalent to Memory Switch B:0)
Switch
Initial
Setting
Adjust Usage/Comments
7 1 Busy tone detection
0: No
1: Yes
Sets this switch to “0” if the ring tone of the remote
unit is mistaken for a busy signal.
6 0 Fallback pattern (bps)
14400 12000 9600 7200 2400
Set at 0: 2 times 2 times 2 times 2 times 2 times
Set at 1: 1 time 1 time 1 time 1 time 4 times
5 0 Overseas mode
0: No
1: Yes
When set at “1”, ignores the first DIS signal and
transmits the DCS signal in response to the
second DIS signal.
4 0 V.29 Echo Protect tone
0: No
1: Yes
International telephone lines equipped with echo
suppression will cut off the beginning portion of the
transmitted information which may cause the
receiver not to receive the training and data. To
protect the received image from degrading, a 0.5
second Echo Protect tone is placed prior to training
using G3 high speed modem training (V.29).
3 1 Maximum transmit speed (kbps)
2.4 4.8 7.2 9.6 12 14.4 16.8 19.2 21.6 24 26.4 28.8 31.2 33.6
0 0 0 0 0 0 0 0 1 1 1 1 1 1
21
0 0 0 0 1 1 1 1 0 0 0 0 1 1
10
0 0 1 1 0 0 1 1 0 0 1 1 0 0
01
0 1 0 1 0 1 0 1 0 1 0 1 0 1
… 75 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Minolta 5600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Minolta 5600 in the language / languages: English as an attachment in your email.

The manual is 3,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info