472291
74
Zoom out
Zoom in
Previous page
1/194
Next page
MINOLTAFAX 5600 Adjustment Procedures
3-31
3.4 Clear Programmed Data / User Settings
User programmed information such as autodialer entries, date, time, Transmit Terminal Identifier (TTI),
Subscriber ID, etc., are stored in the unit’s Random Access Memory (RAM). This information is held by a
battery back up when the power is lost.
This function does not clear the machine parameters, memory switches and unique switches. Therefore,
this setting is useful to reset the user programmed information but leave specific parameters and
switches configured for a particular telephone system, etc.
To reset only each switch, see page 3-2, 3-16 and 3-33.
Note:
If desired, the All RAM Clear setting can be used to erase all user programmed information, all
documents in memory, and reset the memory switches and unique switches to factory defaults.
For information on the All RAM Clear setting, see below.
1. To clear programmed data and user settings, from standby, press
/PROGRAM
,
*
,
2
.
Clear User Settings
Check Program/Enter
2. Press
ENTER
.
Note:
To finish the operation without performing initialization, press
STOP
or
/PROGRAM
.
3.5 All RAM Clear
The All RAM Clear setting will erase all user programmed information, all documents in memory, and
reset the memory switches and unique switches to factory defaults.
This feature may also be used to try and clear a machine malfunction or lock up. If possible, when the All
RAM Clear is used to reset a malfunction or lock up, it is advisable to print the machine settings, one-
touch and speed dial listings to help in reprogramming this information.
Note:
The All RAM Clear does not clear the machine parameters, life monitor and consumable order
sheet. If you need to clear them, see “Clearing the machine parameters,” page 3-2 or “Clear Life
Monitor,” page 3-68.
1. To perform an All RAM Clear, from standby, press
/PROGRAM
,
*
,
3
.
All RAM Clear
Check Program/Enter
2. Press
ENTER
.
Note:
To finish the operation without performing All RAM clear, press
STOP
or
/PROGRAM
.
74


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Minolta 5600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Minolta 5600 in the language / languages: English as an attachment in your email.

The manual is 3,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info