677344
10
Zoom out
Zoom in
Previous page
1/84
Next page
8
EN
Color codes (WiFi control light)
1.
The heater’s WiFi is deactivated by the user.
2.
When installing/connecting the Millheat-app and cloud, the light will flash
in various speed. This is normal.
The heater has a problem connecting to or finding the WiFi signal. Please do
the following:
1. Please turn the heater OFF and ON again.
2. Please restart the WiFi router.
3. Please check the WiFI router to make sure the capacity is sucient for the
number of active devices connected at the same time.
4. Please make sure 2,4 Ghz is activated. If the problem persists we
recommend you to deactivate 5 Ghz during the installation. Aer the
installation 5 Ghz can be activated again.
The heater has not been connected to WiFi. The heater keeps an even
temperature throughout the whole day and night.
The heater is online in the Millheat cloud.
The heaters are oine and have no contact with the Millheat cloud.
Activating WiFi
See figure 7 on separate illustration sheet
Press «add heater» on the home screen in the Millheat-app. Follow the
instructions in the app.
Dectivating WiFi
See figure 8 on separate illustration sheet
Press 1 time on the WiFi button. The heater can now be used as described on
page 6 (usage without WiFi connection). Relevant only if WiFi is already installed.
Reconnecting WiFi
See figure 9 on separate illustration sheet
Press the WiFi button 1 time. Relevant only if WiFi is already installed.
Delete WiFi setting
See figure 10 on separate illustration sheet
Delete WiFi-settings: Press and hold WiFi button for 3 seconds.
The heater can also be reset to the factory settings by doing the following:
Turn o the heater’s main switch. Press and hold while you switch on the
heater’s main switch.
WiFi
(flash)
(flash)
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mill SG1200WiFi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mill SG1200WiFi in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info