677344

Mill SG1200WiFi Manual

8
Zoom out
Zoom in
Previous page
1/84
Next page
6
EN
WARNING! BE SURE THE FOOT IS FITTED CORRECTLY AND ACCORDING TO THE
INSTRUCTIONS BEFORE USING THE HEATER!
Instructions
If the temperature sensor is not functioning properly, you will see this symbol
on the display. Please contact the dealer or importer.
A B
1. Power indicator – shows whether the
heater is using power or not
2. Indicates whether the fan is activated
3. WiFi indicator
4. Desired room temperature
5. Thermostat and WiFi button
1. Thermostat and WiFi button
2. Fan ON/OFF
3. ON/OFF button
Control panel
1. Plug the heater into a grounded outlet.
2. Press the ON/OFF button.
3. Turn the thermostat to the desired temperature while looking at the display. As soon
as the room temperature drops below this level, the heater will automatically start
again. When the room has reached the desired temperature again, the heater will
turn itself o.
4. The thermostat goes from 5 to 35°C.
5. If you want to change the temperature in the room, repeat step 3.
6. Press the fan button to start the fan. Note that the fan is only active when the
heater is heating up (when the power indicator is on).
7.
The heater has an overheat protection that turns the device o if any parts
become extremely hot.
8. If the temperature sensor is not functioning as it should, will be shown on
the display. In such instances, the heater will switch itself o. Please contact your
distributor or importer.
9. To turn o the heater, press the ON/OFF button. Should the heater be le unused
for a longer period, pull out the plug.
Usage without WiFi connection
ATTENTION! Please be aware that when using the fan the temperature showing in the
app will be higher than the actual temperature in the room.
See figure 6 on separate illustration sheet
6
EN
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mill SG1200WiFi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mill SG1200WiFi in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info