Manual Miele WS 5080 (page 59 of 122) (English, German, French, Italian)

529102

Zoom out

Zoom in

1/122

Installation

Electrical connection

All electrical work must be carried out by a sui-

tably competent person in compliance with na-

tional and local regulations.

The electrical safety of this machine is in

accordance with IEC 335-1, IEC 335-2-4, IEC

335-2-7.

The machine must only be connected to the

voltage and frequency shown on the data

plate.

The machine is supplied as standard for con-

nection to a 415 V 3 phase + N electricity

supply, rated load and fusing as shown on the

data plate.

Connection should be made via a suitable iso-

lator, with an on-off switch which is easily ac-

cessible for servicing.

WARNING

THIS APPLIANCE MUST BE EARTHED.

Connection should be made via a suitable iso-

lator which complies with local and national

safety regulations and which is easily accesi-

ble for disconnecting the machine from the

electricity supply. Provision must be made on

site to switch off all poles. Switches with a mi-

nimum all-pole contact gap greater than 3

mm are suitable for isolating the machine.

These include circuit breakers, fuses and re-

lays (IEC/EN 60947).

The isolator switch should be easily accessi-

ble for servicing work.

If the machine is disconnected from the

electricity supply ensure adequate measures

are taken to ensure that the machine cannot

be reconnected to the electricity supply until

all work has been carried out.

Warning

Make sure that the drum turns in the correct

direction when spinning - viewed from the

front this is anti-clockwise. 2 phases need to

be changed if it turns the wrong way.

The motors are fitted with overload protection

switches.

The electrical heating is set ex-works at:

- 9 kW (WS 5080)

- 9 kW (WS 5100)

- 15 kW (WS 5140)

The machine can be converted to:

- 6 kW (WS 5080)

- 6 kW (WS 5100)

- 10 kW (WS 5140)

by disconnecting one heater.

This should only be done by an authorized

Service Engineer.

When the machine is commissioned the hea-

ter rating and fuse rating should be perma-

nently marked on the data plate with the follo-

wing symbol D.

In countries other than G.B. check with your

local agent for conversion possibilities.

The minimum suds level required for activat-

ing the heating given in mm column of water

is 30 mm.

M.-Nr. 04 506 754 59

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Miele WS 5080 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 3,38 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Miele WS 5080 Manual

Product: