529102
58
Zoom out
Zoom in
Previous page
1/122
Next page
Installation
Plumbing
Cold water Hot water Cold water
Hard water
Connection must be made to the water supply
via a stopcock which conforms to current
local and national regulations. This work must
be carried out by an authorised person.
Water Supply (Water Fittings) Regulations
1999 and Water Byelaws 2000, Scotland
The Type A air gap fitted to the machine pro-
vides Category 5 protection thereby enabling
connection to mains water. The air gap is lo-
cated upstream of the detergent box and to
provide protection against the possibility of
backflow of cleaning agents the machine is
supplied with 3 double check valves which
should be connected to the inlet hoses.
See the installation diagram for instructions
on connection to the water supply and for
drainage.
The inlet pressure hoses supplied with the
machine must be used for connection to the
water supply.
To ensure the hot water inlet hose (marked
90°C) lasts for many years it is advised not to
use it on a hot water connection supplying wa-
ter hotter than 70°C.
If replacing inlet hoses only use a hose able
to withstand a burst pressure of at least 70
bar, and a water temperature of at least 90°C.
This also applies to all connection parts. Use
spare parts recommended by the manufactu-
rer.
A water pressure flow rate of at least 1 bar,
static water pressure max. 10 bar is essential
to ensure smooth operation of this machine.
Water taken into the machine must not ex-
ceed a temperature of 70°C.
Connection to cold water only
-See enclosed Installation Diagram.-
58 M.-Nr. 04 506 754
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Miele WS 5080 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Miele WS 5080 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 3,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info