666798

Miele Professional PT 8337 WP Manual

31
Zoom out
Zoom in
Previous page
1/76
Next page
Levelling the machine
The dryer and heat pump unit do not require a plinth.
However, make sure that any uneven areas of the
floor are made level.
The dryer and heat pump unit must be perfectly level
to ensure correct functioning.
The screw feet A can be adjusted to align the dryer
and the heat pump unit.
After aligning correctly you will need to use a
screwdriver to secure discs B to the floor plate.
Allow the unit to acclimatise to the room
temperature and leave to stand for at least one
hour before commissioning.
Installation on a raised plinth
The dryer and heat pump unit can be installed on a
raised concrete plinth.
,
If the dryer and heat pump unit are installed on
an on-site plinth, they must be secured with
clamps. Otherwise there is the danger of them
falling off the plinth.
^
Secure the front feet of the dryer with the clamps
supplied.
b Drill holes for clamps
Payment system
This dryer can be fitted with a payment system.*
A suitable adapter* is required for this. The dryer has
to be reprogrammed for a payment system. This has
to be carried out by an authorised Miele service
technician.
Empty the coin box every day. This prevents too
many coins or tokens collecting in the coin box,
which could lead to the dryer being out of service.
* These can be obtained from Miele or your Miele
Dealer.
Communication module XKM RS232
This dryer can fitted with a communication module
which enables it to be linked to a PC via a serial
interface.
The slot for the communication module is located on
the rear of the dryer.
An editor programme is available from Miele.
Installation and connection
31
… 31 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Miele Professional PT 8337 WP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Miele Professional PT 8337 WP in the language / languages: English, Dutch as an attachment in your email.

The manual is 1,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info