791686
37
Zoom out
Zoom in
Previous page
1/60
Next page
Problem solving guide
37
Problem Cause and remedy
The weld seam is de-
fective or not properly
sealed in one or more
places.
The sealing bar and/or counterpressure bar are dirty
or there are liquid residues on the sealing bar.
Clean and dry the sealing bar and/or counterpres-
sure bar.
The rubber on the counterpressure bar is not evenly
fitted.
Flatten the rubber.
The edge of the bag is dirty (inside and out). For a
perfect weld seam the edge of the bag must be dry
and grease-free in the area of the seam.
Fold the edges of the vacuum sealing bag out-
wards for filling. This will give you a clean, perfect
weld seam.
The edge of the bag was not positioned smoothly
and without creases on the sealing bar.
Position the bag smoothly and without creases
along the sealing bar.
The sensor is lit up
even though a drying
cycle has been carried
out. The drawer cannot
be used.
The drying cycle failed to remove all of the moisture
from the oil circulation system in the vacuum pump.
The drawer is locked and cannot be used for 1hour.
Wait for 1hour and then carry out another drying
cycle (see “Cleaning and care – Carrying out a dry-
ing cycle”). Ensure that the vacuum chamber is
free of liquid residues.
The sensor lights up
yellow. The vacuum is
less than usual.
During the food evacuation process, moisture ingress
into the oil circulation system in the vacuum pump
has occurred. This can impair the performance of the
vacuum levels.
Carry out a drying cycle (see “Cleaning and care –
Carrying out a drying cycle”).
The sensor button
lights up red. A vacu-
uming process cannot
be started.
During the food evacuation process, moisture ingress
into the oil circulation system in the vacuum pump
has occurred. If the sensor lights up red, the
drawer is locked for further use.
Carry out a drying cycle (see “Cleaning and care –
Carrying out a drying cycle”).
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Miele EVS 7010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Miele EVS 7010 in the language / languages: English as an attachment in your email.

The manual is 1.21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Miele EVS 7010

Miele EVS 7010 User Manual - German - 60 pages

Miele EVS 7010 User Manual - Dutch - 60 pages

Miele EVS 7010 User Manual - French - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info