791686
35
Zoom out
Zoom in
Previous page
1/60
Next page
Problem solving guide
35
Problem Cause and remedy
The vacuuming process
takes longer than ex-
pected.
The oil in the vacuum pump has become extremely
hot.
Leave the drawer to cool for an hour before start-
ing another vacuuming process.
When carrying out a number of consecutive vacu-
uming processes, wait a minimum of 2minutes
between each process to prevent the oil from
overheating again.
The vacuum sealing bag
was not sealed in time.
The required vacuum (vacuum setting1) for sealing a
bag was not achieved.
Touch the sensor control again or repeatedly
until the vacuuming process ends and the bag is
sealed.
All the sensor controls
have gone out. The
glass lid will not open.
There was an interruption to the power supply during
the vacuuming process. The vacuum chamber is still
under pressure so the glass lid cannot be opened.
Damage to the drawer.
Do not in any circumstances try to force the glass
lid open or use tools to open it.
When the power supply is restored, the glass lid
can be opened again after initialisation (all sensor
controls and indicators light up).
Start the vacuuming process again if necessary.
There is still too much
air in the bag at the end
of the vacuuming pro-
cess.
The vacuum level was too low.
Start the vacuuming process again with a new bag
and a higher vacuum level.
The vacuum sealing bag is too big for the food to be
vacuumed.
Use a new smaller bag or cut a larger bag to fit the
size of the food.
Start the vacuuming process again, with a higher
vacuum level if necessary.
After several consecut-
ive vacuuming pro-
cesses the weld seam
is faulty/not properly
sealed.
The sealing bar has overheated.
Wait a minimum of 2minutes between individual
vacuuming processes to avoid the sealing bar
overheating again.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Miele EVS 7010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Miele EVS 7010 in the language / languages: English as an attachment in your email.

The manual is 1.21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Miele EVS 7010

Miele EVS 7010 User Manual - German - 60 pages

Miele EVS 7010 User Manual - Dutch - 60 pages

Miele EVS 7010 User Manual - French - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info