579587

Midland Ocean Manual

20
Zoom out
Zoom in
Previous page
1/26
Next page
20
ENGLISH
5) Press the button to store the channel.
• To program another channel – repeat steps 1) to 5).
6.5.b Memory recall
To select a stored channel, follow the steps outlined below:
1) Repeatedly press the F key until the small memory number (from 01
to 20) and corresponding stored channel appear on the display.
2) Select the stored channel and push the PTT, your radio will operate
on that channel.
3) To exit this menu and return in “Stand-by” mode, press .
6.5.c Memory scanning
To scan the stored marine channels only, follow the steps outlined
below:
1) Repeatedly press the F key until the Mem and Scan icons are
flashing simultaneously on the display.
2) Press the or buttons to activate scanning. The transceiver will
begin scanning only the programmed memories.
3) The transceiver will continue scanning the programmed memories
until it picks up a transmission. When this happens, the transcei-
ver will temporarily halt scanning, remaining tuned on that memory
channel for about 5 seconds. During this period, you have a few
options:
• If the communication does not interest you, press the or
buttons to begin memory scanning again.
• If the communication interests you, you can halt scanning by
briefly pressing the button.
4) To exit the scanning mode and return to Stand-by on the currently
selected channel, press the button, or press the F button to
access the following menu setting.
6.6 Weather channel (only with the USA band)
This function is available only on the USA band (ref. par. 6.4). In the
United States, there are a few channels dedicated to weather informa-
tion reception (WX). To recall these:
1) Ensure you have selected the USA band.
2) Repeatedly press the F button until appears on the display with
the weather channel number.
3) Press the or buttons to select the desired weather channel.
4) To exit the weather channel and return to normal channel reception
mode, press the button, or press the F button to access the
next menu setting.
6.7 Automatic weather information warning
(detection of NOAA tone)
This function is available only on the USA band (ref. par. 6.4), and al-
lows for monitoring at regular intervals if a pre-selected weather chan-
nel emits weather information. When this function is active, during
normal functioning (on any USA marine band channel), the transceiver
will execute periodic controls on the pre-selected weather channel to
detect a particular signal (NOAA tone at 1050 Hz) emitted at the same
time as weather information. When Ocean detects a NOAA signal, it
will interrupt normal operations and move automatically to the weather
channel so you are able to listen to essential weather information.
To activate the automatic weather warning:
1) Select the weather channel you desire monitored, following steps 1
through 3 of par. 6.6.
2) Press the F button to access the next menu setting. The sym-
bol will flash with Off (weather warning deactivated).
3) Press the or buttons to select the On (activated) setting.
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midland Ocean at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midland Ocean in the language / languages: English as an attachment in your email.

The manual is 1,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Midland Ocean

Midland Ocean User Manual - German - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info