579587
18
Zoom out
Zoom in
Previous page
1/26
Next page
18
ENGLISH
2) Press the or buttons to change the VOX mode to On or Off.
3) Press the button to confirm the setting change and return to
Stand-by, or press the F key to access the following menu setting.
6.2.b Setting VOX sensitivity
Adjusting the VOX sensitivity avoids the likelihood of the radio going
into transmission mode because of environmental noise. As such, it
should be adjusted to the minimum level necessary to activate tran-
smission by voice.
1) Repeatedly press the F key until the LE (sensitivity level) icon
flashes. The VOX icon and the sensitivity level currently selected
(from 01 to 06) will flash on the display.
2) Press the or buttons to select the desired level (01 = more
sensitive, 06 = less sensitive).
3) Press the button to confirm the setting change and return to
Stand-by, or press the F key to access the following menu setting.
6.2.c Setting VOX delay
During transmission with VOX, a delay avoids the possibility that, du-
ring short pauses in communication, this function does not return the
radio to reception mode. As such, this function should be set at the
minimum level necessary to guarantee this.
1) Repeatedly press the F key until the dL (delay) appears. The VOX
icon and the delay currently selected (from 01 to 06) will flash on
the display.
2) Press the or buttons to select the desired delay time. Six delay
values are available, in increments of 0.5 seconds (01 = 0.5 secon-
ds, 06 = 3.0 seconds).
3) Press the button to confirm the setting change and return to
Stand-by, or press the F key to access the following menu setting.
6.3 Scanning functions
6.3.a Scanning all channels
Ocean can automatically search for signals throughout the marine
band by scanning, i.e. selecting the channels in rapid sequence. When
a signal is detected, the scanning pauses on that channel and remains
blocked until the signal ends (for a maximum of five seconds), giving
the user a chance to respond to a call, if necessary, before Ocean
automatically begins scanning again. To begin scanning, follow the
steps outlined below:
1) Repeatedly press the F key until the Scan icon and the currently
selected channel begins flashing on the display.
2) Press the or buttons to activate scanning. The transceiver will
begin to explore the marine band channels.
3) The transceiver will continue channel scanning until it picks up a
transmission. When this happens, the transceiver temporarily halts
scanning and remains tuned on that channel for about 5 seconds.
During this time, you have a few options:
If the communication does not interest you, wait for 5 seconds
or press the or keys to begin channel scanning again.
If the communication interests you, you can halt scanning by
briefly pressing the or PTT buttons.
4) To exit the scanning mode and return to Stand-by on the currently
selected channel, press the button, or press the F button to
access the following menu setting.
Scanning can also be executed on commonly-used channels only.
For further details, refer to par. 6.5.c.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midland Ocean at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midland Ocean in the language / languages: English as an attachment in your email.

The manual is 1,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Midland Ocean

Midland Ocean User Manual - German - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info