Manual Midland G9 (page 18 of 90) (English, German, Dutch, French, Italian, Portuguese, Spanish)

543265

Zoom out

Zoom in

1/90

Activating / Deactiving the Emergency feature

When you switch on the unit, the Emergency function is activated, but you can disable and enable it again:

Press MENU till the display shows EC on.

Select EC of by using ▲▼ . Conrm your selection by pushing PTT or wait for 5 seconds.

! When the Emergency function is activated (EMG blinking on the display) the following functions

cannot be used: Scan, Monitor, Dual Watch, Out of Range.

Changing the emergency channel

The emergency channel originally preset is P8 DCS 50; but you can change it according to your needs.

! Important: be sure that the Emergency function is active! (EMG blinking). If you decide to change

the channel dedicated to the Emergency function, do not forget to make the same change to all the

radios!

Press the MENU button until the display shows EC on.

Push MENU again (of displayed) and select the desired channel by means of ▲▼. To conrm press PTT or wait

for 5 seconds.

! Important: be sure that the Emergency function is active! (EMG blinking).

If you decide to change the channel dedicated to the Emergency function, do not forget to make the

same change to all the radios!

To set again the original Emergency channel (P8 DCS 50)

Press the MENU button until the display shows EC on.

Push MENU again and select of

To conrm press PTT or wait for 5 seconds.

! If you dedicate any of the standard channels to the Emergency function, remember to use it only for

this purpose, otherwise you will cause interferences.

Manual Out of range function

This function allows you to know if there are any radios within your range.

By pushing EMG twice, you will send a request of acknowledge to the other G9 operating within your range and

tuned on the same channel.

If any radio replies, it means that it’s within your range and you will receive an audio tone for conrmation.

! This function can be used only if the “Automatic Out of Range” feature is not active.

DUAL WATCH

The Dual Watch allows you to monitor constantly two channels of your choice at the same time.

Enabling - Disabling

Press the MENU button until the display shows DW of.

Select the second channel to monitor by pushing ▲▼.

To conrm your selection, press PTT or wait for 5 seconds. The display will alternately show the channel in use

and the second channel to monitor.

To stop the function, simply press MENU.

When the transceiver detects a transmission on one of the two channels, the Dual Watch temporarily pauses,

remains tuned for 5 seconds on the corresponding channel, giving the user a chance to respond to a CALL. After

this pause, the Dual Watch starts again.

! This function can be activated only if the “Emergency” feature is disabled.

Automatic Out-of-Range

By setting this mode a pair of G9 is transmitting every 30 seconds a data control code. As soon as the contact

between both units is getting lost and one radio doesn’t receive this data control code twice consecutively, the icon

OUT starts ashing in the display and you will hear a beep tone.

! This function can be activated only if the “Emergency” feature is disabled.

Activating – Deactivating

Press MENU till the display shows “OUT” and “Or of”, select “Or on” (activated) with the ▲▼ buttons.

Switch off both radios.

Turn them on at the same time.

To disable this function, push MENU till “OUT” and “Or on” are displayed; select “Or of” (disabled) with the ▲▼

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Midland G9 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 6,48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Midland G9 Manual

Product: