Manual Midland G9 (page 16 of 90) (English, German, Dutch, French, Italian, Portuguese, Spanish)

543265

Zoom out

Zoom in

1/90

and 104 DCS tones.

These tones can be set on the following channels:

› Dual band version: only on the 8 main PMR446 channels (from P1 to P8) and on the 69 LPD channels.

› E version (PMR446 only): only on the 8 main PMR446 channels (from P1 to P8)

For both, the pre-set channels from 9p to 24p cannot be modied.

Activating the CTCSS tones:

› Turn on the unit.

› Select the desired channel by pushing the MENU button and the ▲▼ channels.

› Press the MENU button till the display shows CTC and the CTCSS tone blinks on the right (“of”= no code –

default condition).

› Select the desired CTCSS tone by pushing ▲▼.

› To conrm the setting, push PTT or wait for 5 seconds.

Deactivating the CTCSS tones:

If you don’t want to use the CTCSS tones, follow these steps:

› Select the desired channel

› Press the MENU key till the display shows the CTCSS tone blinking on the left;

› Select “of” by means of ▲▼.

Activating the DCS codes:

› Turn on the unit.

› Select the desired channel by pressing MENU and ▲▼ keys.

› Push the MENU button again till the display shows DCS and the tone code blinks on the right (“of”=no code

– default condition).

› Select the desired DCS code by pushing ▲▼.

› To conrm the setting, press the PTT or wait for 5 seconds.

! Channel P8 with DCS tone 50 (P850) has been set at factory for the “Emergency” function; do not use

it for general communications!!

Deactivating the DCS codes:

› Select the desired channel.

› Press the MENU key till the display shows the channel in use and the DCS code blinks on the right.

› Select “of” by pushing ▲▼.

Hi/low power selection (only in PMR446 band)

To select the power level, press the MENU button till the display shows Pr. Use ▲▼ to select L (low power) or H

(high power). To conrm your selection, push PTT or wait for 5 seconds.

When the batteries are fully charged, the high power is 500 mW (ERP), while the low is 10mW (ERP).

If your radio has to operate within a short range, you can select the low power and therefore extend the battery

life.

On LPD channels (only for G9 Dual band version) the output power is always 10 mW (ERP).

PMR446 channels: The selection of high or low power inuences the use of the PTT key.

If you choose “H” (high power), by pressing the PTT key, regardless of what part of it, the transceiver transmit

with high power.

If you choose “L” (low power), by pressing the big PTT, the transceiver will transmit with low power; while by

pressing the small PTT it will transmit with high power.

LPD channels: the high/low output power selection is not available on LPD channels; so the two PTT transmit

always with high power (note for G9 Dualband version).

! WARNING: to optimize the battery consumption, it is necessary to set the Output power of the menu

as “L-low”. In this way, pressing the Boost PTT, you send with high power only when you really need.

As by default the Output power is “H-high”; so it is really recommended to change this parameter to

“L-low”.

VOX function

Midland G9 enables hands free conversations through the VOX function: just speak in the direction of the

microphone and the communication will be automatically activated.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Midland G9 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 6,48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Midland G9 Manual

Product: