Midland G9 PRO instruction guide | 21
Manual Out of range function
This function allows you to know if there are any radios within your range.
By pushing +/EMG twice, you will send a request of acknowledge to the other
G9 PRO operating within your range and tuned on the same channel. If any
radio replies, it means that it’s within your range and you will receive an audio
tone for confirmation.
This function can be used only if the “Automatic Out of Range” feature is not
active.
Dual Watch
The Dual Watch allows you to monitor constantly two channels of your choice
at the same time.
Enabling - Disabling
1. Press the MENU button until the display shows DW of.
2. Select the second channel to monitor by pushing ▲▼.
3. To confirm your selection, press PTT or wait for 5 seconds.
4. The display will alternately show the channel in use and the second chan-
nel to monitor.
5. To stop the function, simply press MENU.
When the transceiver detects a transmission on one of the two channels, the
Dual Watch temporarily pauses, remains tuned for 5 seconds on the corre-
sponding channel, giving the user a chance to respond to a CALL. After this
pause, the Dual Watch starts again.
This function can be activated only if the “Emergency” feature is disabled.
Automatic Out-of-Range
By setting this mode a pair of G9 PRO is transmitting every 30 seconds a data
control code. As soon as the contact between both units is getting lost and one
radio doesn’t receive this data control code twice consecutively, the icon OUT
starts flashing in the display and you will hear a beep tone.
This function can be activated only if the “Emergency” feature is disabled.
