Midland G9 PRO instruction guide | 19
ROGER BEEP (End transmission tone)
When the PTT button is released, the radio will beep to confirm to other users
that your transmission has finished.
In the Midland G9 PRO this function is factory disabled.
To activate it:
1. Press the MENU button until the display shows “rb of”;
2. Using the scroll buttons ▲▼ select “on” and “rb on” will be displayed;
3. To confirm the roger beep activation, press PTT or wait for 5 seconds.
Keypad Beep
Everytime a button is pressed, you will hear a beep.
To disable the beeps, follow this procedure:
1. Press MENU, till the display shows “bP on”.
2. Push ▲▼ till “bP of” is displayed.
3. Confirm your selection by pushing PTT or wait for 5 seconds.
In this way, all beeps and tones are disabled.
To enable the keypad beep, repeat this procedure and select “bP on”
Emergency Call function
The Midland G9 PRO dedicates a channel to the Emergency Calls: all the
G9 PRO operating within your range, even if tuned on dierent channels, can
receive/transmit Emergency messages on that channel.
If you keep pressed the +/EMG button, the communications automatically
switch to the emergency channel (“EC” on the display). An audio signal will be
sent and all the G9 PRO operating within the range will automatically go to
the Emergency channel (“EC”).
If you have disabled this function, you won’t receive/transmit any Emergency
Call.
When the radio is operating on the Emergency channel (EC displayed), all the
buttons except PTT and CALL are disabled.
The G9 PRO will return to the channel in use after one minute from the last
transmission.
To return immediately, push +/EMG. Now you can use all the MENU fun-
ctions.
