Midland G9 PRO instruction guide | 15
“MENU” key
The following features can be selected by using the “MENU” button:
› Channel selection
› CTCSS tone setting
› DCS tone setting
› High/low power selection (only in the PMR446 band)
› VOX
› VibraCALL function
› Call melodies
› Roger Beep
› Keypad Beep
› Emergency channel
› Dual Watch function
› Out of Range
Channel selection
1. Press the MENU button. The number of the channel will start flashing
on the display.
2. Press the scroll buttons ▲▼ till you select the desired channel.
PMR446 traditional band: from P1 to P8 and from 9p to 24p (pre-set)
PMR446 new band: from 1 to 16 and from 17p to 32p (pre-set)
LPD: from 1 to 69.
To switch from PMR to LPD channels, keep pressed the MENU button
for 3 seconds.
3. Press the PTT button to confirm, or wait for 5 seconds.
Channel P8 has been set at factory for the “Emergency” function; we suggest
that you do not use it for general communications!
CTCSS/DCS tone setting
CTCSS and DCS tones are similar to access codes and enable the radio to
communicate only with the users that are tuned on the same channel and have
set the same code. For each channel, you can set up to 38 CTCSS and 104
DCS tones.
These tones can be set on the following channels:
• On the 8 main PMR446 channels (from P1 to P8) and on the 69 LPD
channels.
The pre-set channels from 9p to 24p and from 17p to 32p cannot be modified.
