Manual Midland BTX2 FM (page 24 of 88) (English, German, French, Italian, Portuguese, Spanish)

579660

Zoom out

Zoom in

1/88

Midland BTX2 FM - 23

4. Press the “Backward” button until the red light indicator changes to a steady blue.

5. Now, press “Volume +” or “Volume -“ to increase or reduce sensitivity. Every

time you press the Volume buttons the RED light will ﬂash for conﬁrmation.

When you reach the end of the upper and lower limit, the RED light will not

ﬂash.

6. Press again the “Backward” button; the Blue light will ﬂash several times, in

order to let you know the selected sensitivity:

One ﬂash = VOX disabled

Twice = very low sensitivity

3 times= low sensitivity

4 times= medium sensitivity (default setting)

5 times = high sensitivity

The light indicator is now back to steady RED (“Set up mode”) and the

changes are conﬁrmed

7. If needed, you can adjust again the sensitivity repeating the steps from point

1, otherwise exit the Setting mode by double clicking the “Middle” button.

Once the red light turns oﬀ, the blue led starts blinking. Now you can use your

BTX2 FM.

Disabling the VOX feature (Intercom and telephone)

Follow all the procedure described in the previous steps and choose the option of

only one ﬂash (VOX disabled).

Wired connection always in background

This feature let you keep the wired connection always on, even when the phone

or the intercom is open. This feature can be useful when you connect a PMR446

transceiver.

By default this option is on.

Disabling:

› Enter the “Setup” mode:

› Turn oﬀ the unit

› Press and hold down the “Middle” button about 7 sec., until the Red light is

on permanently.

› Press the “Forward” and “Middle” button together for 3 seconds. The blue LED

will ﬂash twice.

› Double click on the “Middle” button to exit the “Setup” mode and use the BTX2

FM.

Enabling:

Follow the same procedure up described; now the blue LED will ﬂash once.

To exit the “Setup” mode, double click the “Middle” button.

Setup and Firmware update

It is possible to conﬁgure and update the ﬁrmware of your BTX2 FM using the

USB connection to your PC. On the Midland web site www.midlandeurope.com

in the BTX2 FM page you can ﬁnd the PC software and the new ﬁrmware updates

if available.

ATTENTION DO NOT CONNNECT THE UNIT TO THE PC BEFORE you DOWNLOAD AND

INSTALL THE SOFTWARE

Use at your own risk

The use of the device will impair your ability to hear other sounds and others

around you.

Listening to music or speaking on a telephone may prevent you from hearing

others around you and distract you from riding safely. The use of such device

while riding may endanger you and others, and its use, in some areas, could not

be allowed.

Using this device at a high volume may result in permanent hearing loss.

If you experience ringing in your ear or any other hearing related pain, reduce the

volume or discontinue using this device. With continued use at high volume, your

ears may become accustomed to the sound level, which may result in permanent

damage to your hearing.

Please use this device at a safe volume level.

Warranty

The warranty lasts 24 months for the main device and 6 months for the accessori-

es (batteries, chargers, antennas, headsets).

For further information about the warranty, please visit

www.midlandeurope.com

European CE Notice Certiﬁcation and Safety Approval

Information

This product is CE marked according to the RTTE Directive (99/5/EC) and is free

use in all the EU countries.

Users are not permitted to make any changes or modiﬁcations to the device.

Modiﬁcations which are not expressly approved by the producer invalidate the

warranty card.

For further information, please go to our website: www.cte.it

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Midland BTX2 FM in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 9,13 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Midland BTX2 FM Manual

Product: