Manual Midland BTX2 FM (page 22 of 88) (English, German, French, Italian, Portuguese, Spanish)

579660

Zoom out

Zoom in

1/88

Midland BTX2 FM - 21

GPS navigator always in background

To keep the intercom open while the GPS give the street indication you must have the

“background” feature active and the GPS paired on “Vol-” button.

Attention: we can’t garantee this features because is depending on tirth part device.

Support for Stereo (A2DP) voice announcement

BTX2 FM support Stereo (A2DP) voice announcement from GPS Navigators or

smartphone application when paired on “Vol+” button. When a voice announce-

ment “brake in”, Intercom or FM radio is interrupted to give priority to the announce-

ment itself. By default this features is ON; it’s possible to change the priority using

the “BT Updater” PC Software.

How to listen to the FM Radio

The FM Radio receiver is integrated inside the unit. You just need to switch to the

“FM Radio” mode in order to use it. Long press the middle button until you hear “FM

radio” from the voice announcement. Now all the three main button are dedicated to

the FM Radio (See Table).

Press short the Forward or the Backward button to seek the FM Radio station. When

you press long the Forward or the Backward button, you can scan up or down the 6

recorded stations. A voice announcement will tell you the number of which memory

you are entering. A double beep tone will be played when the last or the ﬁrst recorded

station is reached.

To save the station you are listening, press the Forward and Backward buttons together

for 3 sec. You will hear a beep tone for conﬁrmation.

The station is saved over the last recorded station used.

Thanks to the RDS system, the FM Radio will choose the strongest signal available for

the radio station you like to listen.

The RDS system is OFF by default, if needed you can toggle on/oﬀ the RDS pressing

together the “Volume +” and “Volume –“ buttons for 3 sec when the radio is on. A

voice announcement will tell you the RDS status.

FM Radio with intercom

When you are in “FM Radio” mode is not possible to manually open the intercom,

you can only open it using VOX feature (just talk) to the unit paired on the “Middle”

button. To manually activate the intercom you must switch to “Intercom” mode.

How to Disable/Enable the FM Radio

To disable the FM Radio keep pressed the forward button for 7 Sec. it will be confer-

med by the “FM Radio disable” voice announcement. To enable again the FM Radio

keep pressed the forward button for 7 Sec. it will be confermed by the “FM Radio” voice

announcement.

Pairing to a PMR446 radio with integrated or external Bluetooth

The PMR446 Radio can be paired to the “Volume +“ or “Volume -” button. If pai-

red on “Volume -” and the “Background” feature is activated, the PMR446 radio is

always in the background even when you talk on the intercom.

Pairing procedure

› Turn oﬀ the unit

› Press and hold down the “Middle” button about 7 sec., until the Red light is on

permanently.

› Now press ﬁrmly (3 sec) the “Vol +” or “Vol -” button, the Blue and Red light

will ﬂash.

› Follow now the pairing procedure explained on the manual of the transceiver

itself

Attention: If you are pairing to a G8BT transceiver, just when the BTX2 FM ﬁnish the

pairing (only the Blu LED is ﬂashing) you must follow this procedure to activate the

Bluetooth connection:

› Turn oﬀ and on the G8BT and then press for 3 sec. the “BT” button.

› Go to phone mode

› Press “Backward” button to activate G8BT audio (no need to make the pairing

procedure again)

You need to have “background” feature active if you want to have the two way radio

conversation in background with the intercom

How to use the wired audio input

Your Midland BTX2 FM is also supplied with a wired audio input (AUX), that can be

used to connect an audio source, like an iPod (or any other MP3 Player) or a PMR446

transceiver for group communication or for a coverage increase.

Listening to music

To listen to music from the wired input, connect the audio source using the optional

AUX cable.

C-Radio FM mode

Mode Forward button Middle button Rear button

FM Radio Short press: seek station up

Long press: Scan recorded

Short press: On/oﬀ

Long press: Change mode

Short press: seek station up

Long press: Scan recorded

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Midland BTX2 FM in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 9,13 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Midland BTX2 FM Manual

Product: