Manual Midland BT2 (page 4 of 18) (English)

543245

Zoom out

Zoom in

1/18

Structure of the operator’s manual

This manual is divided into 5 main sections:

› Description of the unit and installation brackets

› Pairing with Bluetooth devices

› Using the features of Bluetooth devices

› Using the wire audio input

› Special congurations

To easily congure your BT2 unit, please follow the sequence

of steps described below:

› Step 1: x the unit onto your helmet following the instruc-

tions provided in the “Fixing the unit onto the helmet” sec-

tion.

› Step 2: pair the Bluetooth devices (for example a mobile

phone or GPS) with the BT2 unit. Follow the procedure

described in the chapter: “Pairing with Bluetooth devices”,

choosing the Bluetooth devices you are using.

› Step 3: after completing the pairing operation, go to the

“Using the features of the Bluetooth devices” section, cho-

osing Bluetooth devices you are using.

› Step 4: if you have a wired audio input, read chapter “Using

the wire audio input”.

› Step 5: for information on how to use the advanced featu-

res, read the “Special congurations” chapter.

Charging batteries

Make sure that the unit is fully charged before use. Allow at

least 5-6 hours for a full charge before using the unit for the

rst time. Normally, after the rst time, it takes 4 hours for a

full charge.

Charge the unit by inserting the wall-charger into the charging

socket (lift the rubber cover to insert the plug).

› The red LED on the unit will start ashing when charging

begins.

› Allow the headset to charge until the red LED turns off.

› When the charge is complete, release the headset from

the charger.

Description of the unit

and installation brackets

Description of the BT2 unit

The BT2 has 5 multifunction buttons on the front and 3 wired

connections in the lower section.

Description of the button features:

› Telephone: can be used to enable/disable and manage

mobile phone features

› Intercom: can be used to enable/disable the Intercom fea-

ture and manage 3-way communications

› AUX: can be used to enable/disable the wired audio input

› Volume+: enables you to increase the volume

› Volume -: enables you to decrease the volume

Description of the wired connections

› Charger jack: enables to recharge the unit using a stan-

dard miniUSB power supply

› Audio kit jack: enable to connect an audio kit (stereo head-

set and microphone)

› Auxiliary audio jack (AUX): can be used to connect an

audio source, like a stereo iPod/MP3 player or PMR446

transceiver

Charger

Audio kit

iPod/MP3

PMR446

Phone

Intercom

AUX

Volume +

Volume -

Red and

blue light

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Midland BT2 in the language / languages: English as an attachment in your email.

The manual is 1,12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Midland BT2 Manual

Product: