Manual Midland bt2 intercom (page 29 of 146) (German, French, Italian, Spanish)

232783

Zoom out

Zoom in

1/146

ing a call should never be carried out whilst in charge of a

moving vehicle)

3-way telephone communications

The Intercom feature is temporarily disabled when a phone

call is in progress. However, it is possible to add other par-

ties to the conversation by simply enabling the 3-way com-

munication feature. After the initial call has been established,

briey press the “Intercom” button on the BT2 device that has

received the call (you will hear an audio conrmation tone). To

re-establish a private conversation, press the “Intercom” but-

ton again (you will hear two audio conrmation tones).

Using the MP3 player feature of the mobile

phone

Many mobile phones are now designed to be used as stereo

MP3 players. Your Midland BT2 fully supports the A2DP and

AVRCP protocols that enable you to listen to stereo music

and remotely control your mobile phone’s MP3 player.

You can even use the buttons on the BT2 unit to control the

following play options:

Play, Pause, Forward and Backward.

Attention: The remote control is enabled only if the MP3

player device supports the AVRCP protocol.

Available controls:

To enable your connected MP3 Player, press and hold ›

down the “Intercom” button for 3 seconds.

To play/pause music, press and hold down the “Intercom” ›

button for 3 seconds.

To skip forward to the next song, briey press the “Tele- ›

phone” button.

To skip backwards to the previous song, briey press the ›

“AUX” button.

To disable the MP3 player, press the “Intercom” button (2 ›

beeps will conrm it)

To open the Intercom communication just talk or , for a manu-

al activation, disable rst the MP3 player , pressing the “Inter-

com” button and than press it again to open the Intercom.

The music listening mode has the lowest priority com-

pared to other connections (such as phone calls or In-

tercom conversations). Therefore, the music will always

be disabled when another type of communication is ena-

bled.

Using the features of your GPS sat-nav

To use the features of your GPS Sat-Nav, be sure both units

are turned on and correctly paired together, following the pair-

ing procedure described in the “Pairing the unit with a GPS

Sat-Nav” section.

Priority: communications with the GPS Sat-Nav have the

highest priority, which means that the enabling of the-

se communications causes the temporary disabling of

all other communications (Intercom, music or two way

radiotransceiver). Once the GPS communications have

ended, all other communications are automatically re-

enabled.

Listening to voice instructions from your GPS Sat-Nav

Trafc directions from your GPS Sat-Nav will always be im-

mediately transmitted by temporarily disabling all other ac-

tive communications. Once these voice directions have been

transmitted, your BT2 will automatically re-enable all existing

communications.

Listening to music from your GPS Sat-Nav

The most popular GPS devices usually enable you to listen

to music when no directions are being given. In this case, the

communication with the GPS is always active and has the

highest priority compared to all other active devices.

However, it is possible to enable the Intercom feature at

any time, while listening to music, simply by pressing the “In-

tercom” button to open a 3 way communication. For further

information, see the “3-way communications with the GPS

Sat-Nav” section below.

Using a mobile phone with a GPS Sat-Nav

If you have connected a GPS Sat-Nav to your Midland BT2,

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Midland bt2 intercom in the language / languages: German, French, Italian, Spanish as an attachment in your email.

The manual is 1,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Midland bt2 intercom

Midland bt2 intercom User Manual - English - 23 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Midland bt2 intercom Manual

Product: