Manual Midland BT NEXT PRO (page 36 of 116) (English, German, Dutch, French, Italian, Spanish)

738682

Zoom out

Zoom in

1/116

34 www.midlandeurope.com

4. Press the “Backward” button shortly and the red light changes to a steady blue.

5. Now, press “Volume +” or “Volume -“ to increase or reduce sensitivity. Every time

you press the Volume buttons the RED light will ﬂash for conﬁrmation. When you

reach the end of the upper and lower limit, the RED light will not ﬂash.

6. Press again the “Backward” button shortly; the Blue light will ﬂash several times, in

order to let you know the selected sensitivity:

One ﬂash = VOX disabled

Twice = low sensitivity

3 times= normal sensitivity

4 times= high sensitivity

5 times = Highest sensitivity

The light indicator is now back to steady RED (“Set up mode”) and the changes are

conﬁrmed

7. If needed, you can adjust again the sensitivity repeating the steps from point 1,

otherwise exit the Setting mode by double clicking the “Middle” button. Once the

red light turns o, the blue led starts blinking. Now you can use your BTNEXT PRO

Disabling the VOX feature (Intercom and telephone)

Follow all the procedure described in the previous steps and choose the option of only

one ﬂash (VOX disabled).

Attention! If you disable the VOX feature, you will be able to answer incoming phone calls

only by pressing the “Forward” button.

Wired connection always in background

This feature lets you keep the wired connection always on, even when the phone or the

intercom is open (but not when you are in FM radio mode).

By default the Background feature is ON.

Disabling:

› Enter the “Setup” mode:

› Turn o the unit

› Press and hold down the “Middle” button about 7 sec., until the Red light is on per

manently.

› Press the “Forward” and “Middle” button together for 3 seconds. The blue LED will

ﬂash three times.

› Double click on the “Middle” button to exit the “Setup” mode and use the BTNEXT

PRO

Enabling:

Follow the same procedure up described; now the blue LED will ﬂash once.

To exit the “Setup” mode, double click the “Middle” button.

Setup and Firmware update

It is possible to conﬁgure and update the ﬁrmware of your Midland BTNEXT PRO using

the USB connection to your PC. On the Midland web site www.midlandeurope.com in

the Midland BTNEXT PRO page you can ﬁnd the PC software and the new ﬁrmware

updates if available.

ATTENTION DO NOT CONNNECT THE UNIT TO THE PC BEFORE you

DOWNLOAD AND INSTALL THE SOFTWARE

Use at your own risk

The use of the device will impair your ability to hear other sounds and others around you.

Listening to music or speaking on a telephone may prevent you from hearing others

around you and distract you from riding safely. The use of such device while riding may

endanger you and others, and its use, in some areas, could not be allowed.

Using this device at a high volume may result in permanent hearing loss.

If you experience ringing in your ear or any other hearing related pain, reduce the vo-

lume or discontinue using this device. With continued use at high volume, your ears

may become accustomed to the sound level, which may result in permanent damage

to your hearing.

Please use this device at a safe volume level.

Warranty

The warranty lasts 24 months for the main device and 6 months for the accessories

(batteries, chargers, antennas, headsets, microphones). For further information about

the warranty, please visit www.midlandeurope.com.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Midland BT NEXT PRO in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 7,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Midland BT NEXT PRO Manual

Product: