738682
34
Zoom out
Zoom in
Previous page
1/116
Next page
UK
32 www.midlandeurope.com
Long press the middle button until you hear “FM radio” from the voice announcement.
Now all the three main buttons are dedicated to the FM Radio (See Table C).
Press short the “Forward” or the “Backward” button to seek the FM Radio station.
When you press long the Forward or the Backward button, you can scan up or down the
6 recorded stations. A voice announcement will tell you the number of which memory
you are entering.
To save the station you are listening to, press the Forward and Backward buttons to
-
gether for 3 sec. You will hear a beep tone for confirmation.
The station is saved over the last recorded station used.
Thanks to the RDS system, the FM Radio will choose the strongest signal available for
the radio station you like to listen. The RDS system is OFF by default, if needed you can
toggle on/o the RDS pressing together the “Volume +” and “Volume –“ buttons for 3
sec when the radio is on. A voice announcement will tell you the RDS status.
How to Disable/Enable the FM Radio
By default the FM radio is on.
Disabling:
Enter the “Setup” mode: turn o the unit and hold down the “Middle” button about
7 sec., until the Red light is on permanently.
Press “Middle” and “Volume+” buttons together for 3 seconds. The blue LED will
flash three times.
Double click on the “Middle” button to exit the “Setup” mode and use the Midland
BTNEXT PRO
Enabling:
Follow the same procedure up described; now the blue LED will flash once.
To exit the “Setup” mode, double click the “Middle” button.
FM Radio with intercom
When you are in “FM Radio” mode it is not possible to manually open the intercom, you
can only open it using VOX feature (just talk) to the unit paired on the “Middle” button.
To manually activate the intercom you must switch to “Intercom” mode.
FM Radio in background
It is not possible to have the FM radio along with other audio sources. Any active audio
such as Intercom or coming from the VOL+ or VOL- connection, will pause the FM
radio.
Wired audio input
Your Midland BTNEXT PRO can be connected to a wired audio source, like an iPod (or
any other MP3 Player).
Listening to music
To listen to music from the wired input, connect the audio source using the optional
AUX cable. The volume buttons (Vol + and Vol -) can be used to adjust the volume of
the wired audio source (but not independently from the Intercom Volume). The AGC
system will automatically increase the volume on higher speed.
Attention: never set the volume of the MP3 Player to the maximum possible. Normally the
best level is about the 70% of the maximum.
Hint: We recommend that you perform a few tests adjusting the volume of your iPod/MP3
player so at the normal speed the Headset volume is suited to your needs. The AGC system
will automatically increase the volume on higher speed, so you don’t need the VOL+ or
VOL- buttons to adjust it.
C-Radio FM mode
Mode Forward button Middle button Rear button
FM Radio Short press: seek station up
Long press: Scan recorded
Short press: On/o
Long press: Change mode
Short press: seek station up
Long press: Scan recorded
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midland BT NEXT PRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midland BT NEXT PRO in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 7,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info