543239

Midland BT City 2013 Manual

12
Zoom out
Zoom in
Previous page
1/16
Next page
UK
11
will turn to steady blue.
3. Now, press “Volume +” or “Volume -“to increase or reduce sensi-
tivity. Every time you press the Volume buttons the RED light will
ash for conrmation. When you reach the end of the upper and
lower limit, the RED light will not ash.
4. Double press the “Control” button; the Blue light will ash several
times, in order to let you know the selected sensitivity:
once = VOX disabled
Twice = low sensitivity
3 times= Normal sensitivity
4 times= high sensitivity
5 times = very high sensitivity
Default = high sensitivity
5. The light indicator is now back to steady RED (“Set up mode”) and
the changes are conrmed
6. If needed, you can adjust again the sensitivity repeating the steps
from point 2, otherwise exit the Setting mode by double clicking
the “Control” button. Once the red light turns o, the blue led
starts blinking. Now you can use your BTCity.
Disabling the VOX feature (Intercom and telephone)
Follow all the procedure described in the previous steps and choose
the option 1 (VOX disabled). You will see the blue led blinks once.
Wired connection always on
This feature let you keep the wired connection always on, even when
the phone or the intercom is open. This feature can be useful when
you connect a PMR446 transceiver.
Enabling:
› Enter the “Setup” mode.
› Press the “Volume+” and “Volume -” buttons for one second. The
blue LED will ash once.
› To exit the “Setup” mode double press the “Control” button.
Disabling:
› Follow the same procedure up described; now the blue LED will
ash three times
› To exit the “Setup” mode double press the “Control” button.
Recommendations for specic uses
The section that follows, provides a few useful suggestions on how to
achieve maximum performance from your BTCity unit.
Using a PMR446 transceiver
To be able to use the transceiver, it is necessary to purchase a specic
cable (sold separately) in order to connect the radio to your Midland
BTCity:
› Some manufacturers radios use a dierent pin conguration, so
we recommend that you ask your dealer as to which cable is best
suited to your needs
To communicate via the attached radio, press the transmission Press
Top Talk (PTT) button to speak and release it to listen. It is not possible
to talk and listen simultaneously. The cable connected to the transcei-
ver has a PTT button that can be placed on the handlebar of your bike
or held in your hand (If you are the pillion rider).
Adjust the volume of the transceiver to your needs, remembering that
the volume adjustment is controlled by the automatic AGC system
and that it will therefore be automatically increased in relation to
background noise.
If you wish to use a PMR446 transceiver for group communications
and simultaneously maintain the Intercom feature enabled between
two BTCity devices, you must remember that the Intercom feature is
enabled every time you speak by means of the BTCity’s VOX feature.
Consequently, radio communications will be disabled whilst you are
talking with somebody, because they have a lower priority compared
to Intercom communications.
This can be prevented by enabling the “Wired connection always
on” or “Disabling the VOX feature” (both explained in the previous
section).
Disable the VOX feature, as explained in the previous section, to make
sure that the intercom will not automatically be activated when you
speak on the PMR446. To enable the Intercom feature when using this
conguration, you will have to press “Control” button manually.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midland BT City 2013 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midland BT City 2013 in the language / languages: English as an attachment in your email.

The manual is 3,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Midland BT City 2013

Midland BT City 2013 User Manual - English - 9 pages

Midland BT City 2013 User Manual - German - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info